SuperServer 7089P-TR4T
Key Features – 8-Way MP, 224 Cores |
– Virtualization, ERP, CRM |
– In-Memory Database Application |
– Research lab/National Lab |
– Scale-up HPC |
1. Octa Socket P (LGA 3647) support |
2nd Gen Intel® Xeon® Scalable |
processors (Cascade Lake/Skylake)‡ |
2. 96 DIMMs; up to 24TB 3DS ECC |
DDR4-2933MHz† RDIMM/LRDIMM, |
Supports Intel® Optane™ DCPMM†† |
3. 23 or 39 (OEM) PCI-E 3.0 slots include: |
8 FH x16 PCI-E cards or 8 GPUs or 16 |
U.2 NVMe + 8 FHFL x16 PCI-E cards or |
16 U.2 NVMe + 8 FHFL x16 PCI-E cards |
or 16 U.2 NVMe + 2 LP x8 (in x16) PCI-E |
internal cards (storage module) + 5 FHHL |
x16 PCI-E cards (rear)(Up to 39 PCI-E |
3.0 slots for OEM) |
4. 4 10Gb LAN (SIOM), 1 dedicated LAN for |
IPMI Remote Management, 1 VGA, |
2 USB 2.0, 1 COM via KVM |
5. 16 Hot-swap 2.5″ SAS3 drive bays |
(w/ RAID cards); 8x 2.5″ or 6x 3.5″ |
internal drive bays (w/ RAID cards) |
6. 8x 9cm Hot-swap counter-rotating |
rear fans |
7. 5x 1600W (N+2) Redundant Power |
Supplies, Titanium Level (96%) |
Product SKUs | |
SYS-7089P-TR4T | SuperServer 7089P-TR4T (Black) |
Motherboard | |
Super X11OPi-CPU | |
Processor/Cache | |
CPU | Octa Socket P (LGA 3647) |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, | |
8S-3 UPI up to 10.4GT/s | |
Support CPU TDP 70-205W | |
Cores | Up to 28 Cores |
Note | ‡ BIOS version 3.0 or above is required to support 2nd Gen Intel® Xeon® Scalable processors |
System Memory | |
Memory Capacity | 96 DIMM slots |
Up to 24TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM | |
Supports Intel® Optane™ DCPMM†† | |
Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
†† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
On-Board Devices | |
Chipset | Intel® C621 chipset |
Storage | Intel C621 including 2 SATA3 (SATA DOM), 2 M.2 (SATA3/PCIe), 8 HDD (SATA3), 1 TPM header |
Network Controllers | 4-port 10GBase-T Ethernet SIOM (Intel® X550 controller) |
(via AOM) | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
(via AOM) | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Graphics | ASPEED AST2500 BMC |
Input / Output | |
Storage | 2 SATA DOM (SATA3) ports |
2 M.2 (SATA3/PCI3) ports | |
8 HDD (SATA3) ports | |
LAN | 4 10GBase-T ports via SIOM |
1 dedicated LAN port for IPMI | |
USB | 2 USB 2.0 ports via KVM port |
Serial Port / Header | 1 Fast UART 16550 ports: 1 front via KVM port |
System BIOS | |
BIOS Type | 16MB SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) |
PCI 2.2 | |
ACPI up to 3.0 | |
USB Keyboard support | |
PC Health Monitoring | |
CPU | Monitors for CPU Cores, Chipset Voltages, Memory. |
4+1 Phase-switching voltage regulator | |
FAN | Fans with tachometer monitoring |
Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | |
Temperature | Monitoring for CPU and chassis environment |
Thermal Control for fan connectors | |
Chassis | |
Form Factor | 7U Rackmountable |
Rackmount Kit: Comes with the system | |
Model | CSE-718SAC-R4800 |
Dimensions and Weight | |
Height | 12.2″ (310mm) |
Width | 17.63″ (448mm) |
Depth | 28.87″ (733mm) |
Package | 38.5″ (H) x 29.9″ (W) x 47.2″ (D) |
Weight | Gross Weight: 208 lbs (94.35 kg) |
Net Weight: 180 lbs (81.65 kg) | |
Available Colors | Black |
Drive Bays | |
Hot-swap | 16 Hot-swap 2.5″ SAS3 drive bays (w/ RAID cards) |
8x 2.5″ or 6x 3.5″ internal drive bays (w/ RAID cards) | |
Expansion Slots | |
PCI-Express | 23 PCI-E 3.0 slots total including: |
8 FH x16 PCI-E cards or 8 GPUs or 16 U.2 NVMe + 8 FHFL x16 PCI-E cards or 16 U.2 NVMe + 2 LP x8 (in x16 slot) PCI-E internal cards (storage module) + 5 FHHL x16 PCI-E cards (rear) | |
Up to 39 PCI-E 3.0 slots for OEM | |
Backplane | |
2x 6-port 12G backplane supports 6x 2.5″ SAS3/SATA3 HDD/SSD | |
System Cooling | |
Fans | 8x 9cm 10.5K-10.8K RPM Hot-Swap Counter-rotating Rear Fans |
Power Supply | |
1600W Redundant Power Supplies with PMBus | |
Total Output Power | 1600W/1000W |
Dimension | 73.5 x 40 x 203 mm |
(W x H x L) | |
Input | 100-127Vac / 13 – 9A / 50-60Hz |
200-240Vac / 10 – 8A / 50-60Hz | |
+12V | Max: 83.3A / Min: 0A (100-127Vac) |
Max: 133A / Min: 0A (200-240Vac) | |
12Vsb | Max: 2.1A / Min: 0A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | Titanium Level |
[ Test Report ] | |
Operating Environment | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: |
10°C ~ 35°C (50°F ~ 95°F) | |
Non-operating Temperature: | |
-40°C to 60°C (-40°F to 140°F) | |
Operating Relative Humidity: | |
8% to 90% (non-condensing) | |
Non-operating Relative Humidity: | |
5% to 95% (non-condensing) |
Specification
Parts List – (Items Included) | |||
Part Number | Qty | Description | |
Chassis | CSE-718SAC-R4800 | 1 | CSE-718SAC-R4800 7U Chassis |
Motherboard | X11OPi-CPU | 8 | Super X11OPi-CPU Motherboard |
Add-on Card / Module | AOC-MTG-I4TM-P | 1 | [NR]AOC-MTG-I4TM-P |
Add-on Card / Module | AOM-X11OPI-HDD-P | 1 | Storage add-on module for X11OPI series MB |
Add-on Card / Module | AOM-X11OPI-KVM-P | 1 | KVM board for X11OPI Eight Way system |
Add-on Card / Module | AOM-X11OPi-LBG-P | 1 | PCH and BMC Add on Module for X11OPi series 7u 8-way system, |
Backplane | BPN-SAS3-213A | 1 | 16-port 2U SAS3 12Gbps direct-attached backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD |
Backplane | BPN-X11OPI | 1 | Midplane for X11 8-way 7U server 7089P, support hot plug PCIE |
Cable 1 | CBL-0218L | 1 | USB/KVM/SUVI,36 PIN TO 9 PIN/15 PIN/2 USB CH,11.5CM,30/28AWG |
Cable 2 | CBL-0449L | 1 | HDD power extension for X8OBN, special 8 pin to 4 HDD. 45cm. 18AWG |
Cable 3 | CBL-SAST-0508-02 | 2 | MINI SAS HD-MINI SAS,6G,INT,50CM,SB,30AWG |
Riser Card | RSC-BLG-E16R | 8 | RSC-BLG-E16R |
Riser Card | RSC-S-6-OP | 8 | 1U LHS Riser Card with one PCI-E 3.0 x16 slot for the X11OPI |
Riser Card | RSC-X11OPI-PCIE | 5 | PCIE riser card for X11OPI series 7U 8 way system,RoHS |
Heatsink / Retention | SNK-P0067PS | 8 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Power Supply | PWS-1K62A-1R | 5 | AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 – 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
FAN 1 | FAN-0171L4 | 8 | 92x92x76 mm, 10.5K-10.8K RPM, Counter-rotating Exhaust Fan for SC718 X10 8-way Server |
Optional Parts List | |||
Part Number | Qty | Description | |
Storage Options | See Details | – | SAS3 and NVMe Options |
GPU Power Cable | CBL-PWEX-0665 | – | PCIe 8 pin female(black) to CPU 8 pin female(white), K80/M60/M40 GPU power cable, 30cm, 18AWG,RoHS/REACH |
Global Services & Support | OS4HR3/2/1 | – | 3/2/1-year onsite 24x7x4 service |
OSNBD3/2/1 | – | 3/2/1-year onsite NBD service | |
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) |
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
Packing Information
SuperServer 7089P-TR4T is sealed in Brocade original box. We will also pack SuperChassis 7089P-TR4T the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Reviews
There are no reviews yet.