SuperServer 6029BT-HNC0R
Key Applications – Compute Intensive Application |
– HPC, Data Center, Enterprise |
Server |
– Hyperscale / Hyperconverged |
Key Features |
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following: |
1. Dual Socket P (LGA 3647) support |
2nd Gen Intel® Xeon® Scalable |
processors (Cascade Lake/Skylake)‡ |
2. 24 DIMMs; up to 6TB 3DS ECC |
DDR4-2933MHz† RDIMM/LRDIMM, |
Supports Intel® Optane™ DCPMM†† |
3. 2 PCI-E 3.0 x16 (LP) slot; 1 SIOM |
card support (flexible networking) |
Note: must bundle with Network card |
4. 3 Hot-swap 3.5″ NVMe/SAS3 drive bays; |
2 M.2 SATA3 or NVMe support |
5. SAS3 support via Broadcom 3008; |
IT mode |
6. 1 Carrier Card slot (M.2 support) |
7. IPMI 2.0 + KVM with dedicated LAN |
8. Video via Aspeed AST2500 BMC |
9. 4 Heavy duty 8cm PWM fans with |
air shroud |
10. 2200W Redundant Power Supplies |
Titanium Level (96%) |
Product SKUs | |
SYS-6029BT-HNC0R | SuperServer 6029BT-HNC0R (Black) |
Motherboard | |
Super X11DPT-B | |
Processor | |
CPU | Dual Socket P (LGA 3647) |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, | |
Dual UPI up to 10.4GT/s | |
Support CPU TDP 70-205W* | |
Cores | Up to 28 Cores |
Note | * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization. |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
System Memory | |
Memory Capacity | 24 DIMM slots |
Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM | |
Supports Intel® Optane™ DCPMM†† | |
Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
†† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
On-Board Devices | |
Chipset | Intel® C621 chipset |
SAS | SAS3 (12Gbps) via Broadcom 3008; IT mode |
Network | Must bundle with at least one SIOM network card |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
Video | ASPEED AST2500 BMC |
Input / Output (per Node) | |
LAN | 1 RJ45 Dedicated IPMI LAN port |
USB | 2 USB 3.0 ports (rear) |
Video | 1 VGA port |
DOM | 1 SuperDOM (Disk on Module) port |
Others | M.2 and SATA DOM for boot drive only |
System BIOS | |
BIOS Type | AMI 32Mb SPI Flash ROM |
Management | |
Software | Intel® Node Manager |
IPMI 2.0 | |
KVM with dedicated LAN | |
SSM, SPM, SUM | |
SuperDoctor® 5 | |
Watch Dog | |
Power Configurations | ACPI / APM Power Management |
PC Health Monitoring | |
CPU | Monitors for CPU Cores, Chipset Voltages, Memory. |
4+1 Phase-switching voltage regulator | |
FAN | Fans with tachometer monitoring |
Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | |
Temperature | Monitoring for CPU and chassis environment |
Thermal Control for fan connectors | |
Chassis | |
Form Factor | 2U Rackmount |
Model | CSE-827BHQ+-R2K22BP |
Dimensions and Weight | |
Width | 17.6″ (447mm) |
Height | 3.47″ (88mm) |
Depth | 30.11″ (765mm) |
Package | 9.76″ (H) x 24.65″ (W) x 45.28″ (D) |
Weight | Gross Weight: 86.5 lbs (39.24 kg) |
Net Weight: 56 lbs (25.4 kg) | |
Available Colors | Black |
Front Panel | |
Buttons | Power On/Off button |
UID button | |
LEDs | Power status LED |
HDD activity LED | |
Network activity LEDs | |
Universal Information (UID) LED | |
Expansion Slots (per Node) | |
PCI-Express | 2 PCI-E 3.0 (x16) Low-profile slots |
1 SIOM card support | |
(must bundle with network card) | |
Drive Bays / Storage (per Node) | |
Hot-swap | 3 Hot-swap 3.5″ NVMe/SAS3 drive bays |
Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD. | |
M.2 | 2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B |
System Cooling | |
Fans | 4 Heavy duty 8cm PWM fans with air shroud |
Power Supply | |
2200W Redundant Power Supplies with PMBus | |
Total Output Power | 1200W/1800W/1980W/2090/2200W |
Dimension | 45 x 40 x 480 mm |
(W x H x L) | |
Input | 1200W: 100-127Vac / 50-60Hz |
1800W: 200-220Vac / 50-60Hz | |
1980W: 220-230Vac / 50-60Hz | |
2090W: 230-240Vac / 50-60Hz | |
2090W: 180-220Vac (for UL/cUL only) | |
2200W: 220-240Vac (for UL/cUL only) | |
2090W: 230-240Vdc (for CCC only) | |
+12V | Max: 100A / Min: 0A (100-127Vac) |
Max: 150A / Min: 0A (200-220Vac) | |
Max: 165A / Min: 0A (220-230Vac) | |
Max: 174.17A / Min: 0A (230-240Vac) | |
Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) | |
Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) | |
Max: 174.17A / Min: 0A (230-240Vdc, CCC only) | |
12Vsb | Max: 2.1A / Min: 0A |
Output Type | Gold Finger |
Certification | Titanium Level |
[ Test Report ] | |
Operating Environment | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: |
10°C ~ 35°C (50°F ~ 95°F) | |
Non-operating Temperature: | |
-40°C to 60°C (-40°F to 140°F) | |
Operating Relative Humidity: | |
8% to 90% (non-condensing) | |
Non-operating Relative Humidity: | |
5% to 95% (non-condensing) |
Specification
Parts List – (Items Included) | |||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X11DPT-B | 4 | Super X11DPT-B Motherboard |
CSE-827BHQ+-R2K22BP | 1 | 2U Chassis | |
Backplane | BPN-ADP-6S3008N4-1UB | 4 | Big Twin 1U hybrid ADP supporting 6x SAS3 and 4x NVMe |
Backplane | BPN-SAS3-827BHQ-N3 | 1 | 2U 12-Port 4-Node Hybrid Backplane Supports 3×3.5 |
Cable 1 | CBL-PWCD-0578 | 2 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
Drive Tray(s) | MCP-220-00133-0B-BULK | 12 | Black gen 8 hot-swap 3.5 |
Parts | MCP-240-82718-0N | 1 | SC827B BigTwin type I (Impact) BPN retention bkt assy |
Air Shroud | MCP-310-21718-0B | 4 | Bigtwin air box for X11DPT-B(4pcs/set) |
Air Shroud | MCP-310-21724-0B | 4 | Bigtwin 2U4N plastic air shroud (2pcs) for Cascade lake MB |
Manual | MNL-2092-QRG | 1 | 6029BT-HNC0R Quick Reference Guide |
Riser Card | RSC-P-6 | 4 | RSC-P-6 (1U LHS TwinPro RSC with 1 PCI-Ex16),RoHS |
Riser Card | RSC-R1UTP-E16R | 4 | 1U RHS TwinPro Riser card with one PCI-E x16 slot |
Heatsink / Retention | SNK-P0067PS | 4 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Heatsink / Retention | SNK-P0067PSM | 4 | 1U Passive CPU Heat Sink with a 26-mm Wide Middle Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Fan | FAN-0162L4 | 4 | 80x80x38 mm, 13.5K RPM, HCP, LMV, and LPC Cooling Fan |
Power Supply | PWS-2K22A-1R | 2 | 1U 2200W Redundant Power Supply Titanium, 45(W) X 40(H) X 48 |
Optional Parts List | |||
Part Number | Qty | Description | |
Fan | FAN-0191L4 | – | 80x80x38 mm, 14.9K RPM, Non-hot-swappable Middle Cooling Fan (Optimal for computational performance) |
3.5″ to 2.5″ Converter Tray | MCP-220-00140-0B | – | Black gen 8 hot-swap 3.5-to-2.5 Tool-less HDD tray, orange tab |
TPM security module | AOM-TPM-9670H-S | 1 | SPI Capable TPM 2.0 Provisioned for Server, Horizontal Form Factor |
TPM security module | AOM-TPM-9671H-S | 1 | SPI Capable TPM 1.2 Provisioned for Server, Horizontal Form Factor |
Intel VROC RAID Key | AOC-VROCINTMOD | 1 | Intel VROC, RAID 0, 1, 5, 10 (Intel SSD Only) |
AOC-VROCSTNMOD | 1 | Intel VROC Standard, RAID 0, 1, 10 | |
AOC-VROCPREMOD | 1 | Intel VROC Premium, RAID 0, 1, 5, 10 | |
Global Services & Support | OS4HR3/2/1 | – | 3/2/1-year onsite 24x7x4 service |
OSNBD3/2/1 | – | 3/2/1-year onsite NBD service | |
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) |
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
SuperDOM | – | – | Supermicro SATA DOM Solutions [Details] |
Network Card(s) | AOC-S40G-i2Q | – | Standard LP 2-port 40GbE controller, based on Intel Fortville XL710 |
AOC-SGP-i2 | – | Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2 | |
AOC-SGP-i4 | – | Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350 | |
AOC-STG-b4S | – | Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S | |
AOC-STGN-i2S | – | Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES | |
AOC-STGN-i1S | – | Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN | |
AOC-STG-i2T | – | Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540 | |
AOC-STG-i2 | – | Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB | |
Carrier Card(s) | AOC-SMG3-2H8M2-B | – | 2x Hybrid NVMe/SATA M.2 carrier for BigTwin,HF,RoHS |
AOC-SMG2-2TM2 | – | 2x SATA M.2 RAID 1 adapter for BigTwin,HF,RoHS |
Packing Information
SuperServer 6029BT-HNC0R is sealed in Brocade original box. We will also pack SuperChassis 6029BT-HNC0R the second box before shipping.
![](https://ciscoswitchdna.com/wp-content/uploads/2022/07/photobank.webp)
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Shipping Methods
![](https://ciscoswitchdna.com/wp-content/uploads/2022/07/DHL_logo.webp)
2-4 business days
![](https://ciscoswitchdna.com/wp-content/uploads/2022/07/TNT_Express_Logo.webp)
2-4 business days
![](https://ciscoswitchdna.com/wp-content/uploads/2022/07/fedex_logo.webp)
2-4 business days
![](https://ciscoswitchdna.com/wp-content/uploads/2022/07/ems_logo.webp)
Reviews
There are no reviews yet.