Supermicro SuperServer 2028UT-BC1NRT
Key Features |
1. Dual socket R1 (LGA 2011) supports |
Intel® Xeon® processor E7-8800 v2 |
/ E7-4800 v2 / E7-2800 v2 family |
(15-Core), w/ QPI up to 8.0 GT/s |
2. 2x NVMe HDD bays and 8x Hot-swap |
2.5″ SAS3 (12Gbps) via Broadcom 3108 |
3. Up to 2TB ECC DDR3, up to 1600MHz; |
32x DIMM slots |
4. 2x PCI-E 3.0 x16 FH/HL slots, |
1x PCI-E 3.0 x8 MicroLP card |
5. Dual 10GBase-T ports – Intel® X540 |
6. 1280W Redundant Power Supplies |
Platinum Level Digital (95%+) |
SYS-2028UT-BC1NRT | SuperServer 2028UT-BC1NRT (Black) |
Motherboard | |
Super X10DBT-T | |
Processor/Cache | |
CPU | Dual Socket R1 (LGA 2011) |
Intel® Xeon® processor E7-8800 v2 / E7-4800 v2 / E7-2800 v2 (up to 15 Cores and 155W) | |
Note | † BIOS version 3.0 or above is required |
Cache | Up to 37.5MB |
System Bus | QPI up to 8 GT/s |
System Memory | |
Memory Capacity | 32x 240-pin DDR3 DIMM slots |
Up to 2TB DDR3 ECC LRDIMM | |
Up to 1TB DDR3 ECC Registered memory (RDIMM) | |
Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
LRDIMM 64GB | |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | Corrects single-bit errors |
Detects double-bit errors (using ECC memory) | |
On-Board Devices | |
Chipset | Intel® C602 Chipset |
SAS3 | Dual set of Broadcom 3108 SAS3 (12Gbps); RAID 0, 1, 5, 6, 10, 50 |
Daughter card: BPN-ADP-8S3108-1UBL | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
ASPEED AST2400 BMC | |
Network Controllers | Intel® X540 Dual Port 10GBase-T Controller |
Virtual Machine Device Queues reduce I/O overhead | |
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
1x Realtek RTL8211E PHY (dedicated IPMI) | |
Graphics | ASPEED AST2400 BMC |
Input / Output | |
SAS3 | 8x SAS 3.0 ports (12Gbps) |
LAN | 2x RJ45 10GBase-T LAN ports |
1x RJ45 Dedicated IPMI LAN port | |
USB | 2x USB 2.0 ports total (2x rear) |
VGA | 1x VGA port |
Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
Chassis | |
Form Factor | 2U Rackmount |
Model | CSE-227HD-R1K28B |
Dimensions and Weight | |
Width | 17.2″ (437mm) |
Height | 3.5″ (89mm) |
Depth | 28.6″ (726mm) |
Gross Weight | 50 lbs (22.7kg) |
Available Colors | Black |
Front Panel | |
Buttons | Power On/Off button |
System Reset button | |
UID button | |
LEDs | Power status LED |
HDD activity LED | |
2x Network activity LEDs | |
Universal Information (UID) LED | |
Expansion Slots | |
PCI-Express | 2x PCI-E 3.0 x16 slots (FH/HL) |
1x PCI-E 3.0 x8 MicroLP card | |
Drive Bays (per node) | |
Hot-swap | 8x Hot-swap 2.5″ SAS3 HDD bays |
2x NVMe drive bays | |
Backplane | |
1x SAS/SATA Backplane | |
System Cooling | |
Fans | 4x 80mm 4-pin PWM fans |
Power Supply | |
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
AC Input | 1000W Output @ 100-140V, 8-12A, 50-60Hz |
1280W Output @ 180-240V, 6-8A, 50-60Hz | |
DC Output | 1000W: +12V/83A; +5Vsb/4A |
1280W: +12V/106.7A, +5Vsb/4A | |
Certification | |
Platinum Certified | |
[ Test Report ] | |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) |
APM 1.2 | |
PCI 2.2 | |
ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
BIOS resuce hot keys | |
USB Keyboard support | |
SMBIOS 2.3 | |
UEFI | |
Operating Environment / Compliance | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: |
10°C to 35°C (50°F to 95°F) | |
Non-operating Temperature: | |
-40°C to 70°C (-40°F to 158°F) | |
Operating Relative Humidity: | |
8% to 90% (non-condensing) | |
Non-operating Relative Humidity: | |
5% to 95% (non-condensing) |
Specification
Parts List – (Items Included) | |||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X10DBT-T | 2 | Super X10DBT-T Motherboard |
CSE-227HD-R1K28B | 1 | 2U Chassis | |
Air Shroud | MCP-310-22701-0B | 2 | Mylar airshroud for SC227 in X10DBT,RoHS/REACH |
Backplane | BPN-ADP-8PCIE3-1UBR-P | 2 | Right 1U adapter card for BigTwin, 8x PCIe gen3 lanes |
Backplane | BPN-ADP-8S3108-1UBL | 2 | Ultra Twin SAS 3108 daughter card |
Backplane | BPN-SAS3-227HD-N2 | 1 | 20-port 2U Big Twin SAS3 CSE-227HD (8 HDD + 2 NVMe per node) backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices |
Label | LBL-0968 | 1 | Pack of 4 NVMe label for Gen 3, 2.5 inch HDD Tray,RoHS/REACH |
Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Manual | MNL-1603-QRG | 1 | SYS-2028UT-BTNRT/BC1NRT, QRG,HF,RoHS/REACH |
Riser Card | RSC-R1UW-2E16 | 2 | 1U LHS WIO Riser card with two PCI-E x16 slots |
Heatsink / Retention | SNK-P0057PS | 4 | 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
Power Supply | PWS-1K28P-SQ | 2 | 1U 1280W, redundant single output power supply |
Rail Set | MCP-290-00053-0N | 1 set | Rail set, quick/quick, default for 2,3U 17.2″W |
Software | SFT-OOB-LIC | 2 | License key for enabling OOB BIOS management |
Packing Information
SuperServer 2028UT-BC1NRT is sealed in Brocade original box. We will also pack SuperChassis 2028UT-BC1NRT the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Reviews
There are no reviews yet.