SuperServer 1028UX-LL1-B8
| Key Features Support Hyper-Speed |
| 1. Dual Intel® Xeon® processor |
| E5-2643 v4 |
| 2. 8x 8GB DDR4-2400MHz (Default), up to |
| DDR4- 2400†MHz ; 16 DIMM slots |
| 3. Expansion slots via riser card: |
| 2 PCI-E 3.0 x16, Full-height, 10.5″ Length |
| 1 PCI-E 3.0 x8, Low-profile |
| 1 PCI-E 3.0 x8 SAS3 integrated |
| 4. 4 Gigabit Ethernet LAN ports |
| 5. Integrated IPMI 2.0 with KVM and |
| Dedicated LAN |
| 6. 10 Hot-swap 2.5″ Drive Bays: |
| 8 SAS3 (Broadcom 3108), 2 SATA3, |
| 2 NVMe ports support via |
| optional AOC-URN2-I2XT |
| (with 2x 10GBase-T ports) |
| 7. 8 heavy duty fans w/ optimal |
| fan speed control |
| 8. 750W Redundant Power Supplies |
| Platinum Level (94%+) |
| Product SKUs | |
| SYS-1028UX-LL1-B8 | SuperServer 1028UX-LL1-B8 (Black) |
| Motherboard | |
| Super X10DRU-XLL | |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2643 v4 (Included) * |
| Dual Socket R3 (LGA 2011) | |
| Cores / Cache | Up to 6 Cores / Up to 20MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory | |
| Memory Capacity | 8x 8GB DDR4-2400MHz (Default) |
| 16x 288-pin DDR4 DIMM slots | |
| Up to 2TB† ECC 3DS LRDIMM, 768GB ECC RDIMM | |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
| LRDIMM: 64GB, 32GB | |
| 3DS LRDIMM: 128GB | |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C612 chipset |
| SAS | Broadcom 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
| ASPEED AST2400 BMC | |
| Graphics | ASPEED AST2400 BMC |
| Input / Output | |
| SAS | 8 SAS3 (12Gbps) ports |
| SATA | 2 SATA3 (6Gbps) ports |
| NVMe | 2 NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT) |
| LAN | 4 RJ45 Gigabit Ethernet ports |
| 1 RJ45 Dedicated IPMI LAN port | |
| USB | 5 USB 3.0 ports |
| (2 rear, 2 via header, 1 Type A) | |
| Video | 1 VGA Connector |
| Serial Port / Header | 1 Fast UART 16550 serial |
| 1 COM port (rear) | |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) |
| APM 1.2 | |
| PCI 2.3 | |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
| USB Keyboard support | |
| SMBIOS 2.7.1 | |
| UEFI 2.3.1 | |
| Chassis | |
| Form Factor | 1U Rackmount |
| Model | CSE-119UTS-R751P-T |
| Dimensions and Weight | |
| Height | 1.7″ (43mm) |
| Width | 17.2″ (437mm) |
| Depth | 28.5″ (724mm) |
| Gross Weight | 48 lbs (21.8 kg) |
| Available Color | Black |
| Front Panel | |
| Buttons | Power On/Off button |
| System Reset button | |
| LEDs | Power LED |
| Hard drive activity LED | |
| 2 Network activity LEDs | |
| System Overheat LED / Fan fail LED / | |
| UID LED | |
| Expansion Slots | |
| PCI-Express | Expansion slots via riser card: |
| 2 PCI-E 3.0 x16, Full-height, 10.5″ Length | |
| 1 PCI-E 3.0 x8, Low-profile | |
| 1 PCI-E 3.0 x8 SAS3 integrated | |
| Drive Bays | |
| Hot-swap | 8 Hot-swap 2.5″ SAS3 drive bays |
| 2 Hot-swap 2.5″ SATA3 drive bays | |
| Optional NVMe support: 2 NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports) | |
| System Cooling | |
| Fans | 8 heavy duty fans with optimal fan speed control |
| Air Shroud | 2 Air Shroud |
| Power Supply | |
| 750W Redundant Power Supplies with PMBus | |
| Total Output Power | 750W: 100 – 127Vac |
| 750W: 200 – 240Vac | |
| Dimension | 73.5 x 40 x 203 mm |
| (W x H x L) | |
| Input | 100-127Vac / 9.5A Max / 50-60Hz |
| 200-240Vac / 4.5A Max / 50-60Hz | |
| +12V | Max: 62.5A / Min: 0A |
| 12V SB | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Platinum Level |
| [ Test Report ] | |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
| CPU Core 6-Phase-switching voltage regulator | |
| FAN | Total of eight 4-pin PWM fans |
| 8x fans with tachometer monitoring | |
| Status monitor for speed control | |
| Status monitor for on/off control | |
| Low noise fan speed control | |
| Temperature | Monitoring for CPU and chassis environment |
| CPU thermal trip support | |
| Thermal Control for 8x Fan Connectors | |
| PSU I2C temperature sensing logic | |
| Thermal Monitor 2 (TM2) support | |
| PECI | |
| LED | Power Fail / Overheat LED |
| Suspend-state Indicator LED | |
| UID LED | |
| Other Features | SDDC Support |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| 10°C to 35°C (50°F to 95°F) | |
| Non-operating Temperature: | |
| -40°C to 70°C (-40°F to 158°F) | |
| Operating Relative Humidity: | |
| 8% to 90% (non-condensing) | |
| Non-operating Relative Humidity: | |
| 5% to 95% (non-condensing) | |
Specification
| Parts List – (Items Included) | |||
| Part Number | Qty | Description | |
| Motherboard / Chassis | MBD-X10DRU-XLL | 1 | Super X10DRU-XLL Motherboard |
| CSE-119UTS-R751P-T | 1 | CSE-119UTS-R751P-T Chassis | |
| Fan | FAN-0101L4 | 8 | 40×56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
| Air Shroud | MCP-310-81907-0N | 2 | SC819UT PLASTIC AIR SHROUD 16 DIMM |
| Add-on Card | AOC-S3108L-H8IR-16DD | 1 | SAS-3, GEN-3 RAID card. Supports 12Gb and R0,1,5,6,10,50 and 60. Includes 2GB memory |
| Add-on Card | AOC-UR-I4G-O-P | 1 | 1U Ultra Riser based on Intel i350AM4 controller with 4 GbE RJ45 ports and 1 internal PCI-E x8 3.0 slot |
| CPU | P4X-DPE52643V4-SR2P4 | 2 | BDW-EP 6C/12T E5-2643 v4 3.4G 20M 9.6GT 135W R3 2011 R0 |
| Memory | MEM-DR480L-SL02-ER24 | 8 | 8GB DDR4-2400 1Rx4 LP ECC REG DIMM |
| Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management |
| Power Supply | PWS-751P-1R | 2 | 1U 750W Redundant Platinum Single Output Power Supply w/Pmbus W73.5xH40xL203mm,RoHS/REACH |
| Optional Parts List | |||
| Part Number | Qty | Description | |
| CacheVault(s) | BTR-CV3108-1U1 | – | CacheVault for Broadcom 3108 with Supercap mounting in 1U 40×56 fan tray |
| BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 | – | CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location | |
| BTR-TFM8G-LSICVM02 & MCP-240-00127-0N | – | CacheVault for Broadcom 3108; Supercap mounting bracket for 2.5″ HDD location | |
| Global Services & Support | OS4HR3/2/1 | – | 3/2/1-year onsite 24x7x4 service |
| OSNBD3/2/1 | – | 3/2/1-year onsite NBD service | |
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
Packing Information
SuperServer 1028UX-LL1-B8 is sealed in Brocade original box. We will also pack SuperChassis 1028UX-LL1-B8 the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Shipping Methods
2-4 business days
2-4 business days
2-4 business days
5-7 business days
Payment Method
T/T,Western Union, HSBC and Money Gram will be accepted.Faster payment will help you to get the items earlier.
Reviews
There are no reviews yet.