SuperServer 1028UX-LL3-B8
| Key Features Support Hyper-Speed |
| 1. Dual Intel® Xeon® processor |
| E5-2689 v4 (Broadwell) |
| 2. 8x 8GB DDR4-2400MHz (Standard), bis zu |
| DDR4- 2400†MHz ; 16 DIMM-Steckplätze |
| 3. Expansion slots via riser card: |
| 2 PCI-E 3.0 x16, Full-height, 10.5″ Länge |
| 1 PCI-E 3.0 x8, Low-profile |
| 1 PCI-E 3.0 x8 SAS3 integrated |
| 4. 4 Gigabit Ethernet LAN ports |
| 5. Integrated IPMI 2.0 with KVM and |
| Dedicated LAN |
| 6. 10 Hot-swap 2.5″ Drive Bays: |
| 8 SAS3 (Broadcom 3108), 2 SATA3, |
| 2 NVMe ports support via |
| optional AOC-URN2-I2XT |
| (with 2x 10GBase-T ports) |
| 7. 8 heavy duty fans w/ optimal |
| fan speed control |
| 8. 750W Redundante Netzteile |
| Platinum Level (94%+) |
| Product SKUs | |
| SYS-1028UX-LL3-B8 | SuperServer 1028UX-LL3-B8 (Schwarz) |
| Hauptplatine | |
| Super X10DRU-XLL | |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2689 v4 (Inbegriffen) * |
| Dual Socket R3 (LGA 2011) | |
| Kerne / Cache | Bis zu 10 Kerne / Up to 25MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Notiz | † BIOS version 2.0 or above is required |
| Notiz | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| Systemspeicher | |
| Speicherkapazität | 8x 8GB DDR4-2400MHz (Standard) |
| 16x 288-pin DDR4 DIMM slots | |
| Up to 2TB† ECC 3DS LRDIMM, 768GB ECC RDIMM | |
| Speichertyp | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
| LRDIMM: 64GB, 32GB | |
| 3DS LRDIMM: 128GB | |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C612 chipset |
| SAS | Broadcom 3108 SAS3 (12Gbit/s) controllers; ÜBERFALL 0, 1, 5, 6, 10, 50 Unterstützung |
| SATA | SATA3 (6Gbit/s) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
| ASPEED AST2400 BMC | |
| Grafik | ASPEED AST2400 BMC |
| Eingang / Output | |
| SAS | 8 SAS3 (12Gbit/s) Häfen |
| SATA | 2 SATA3 (6Gbit/s) Häfen |
| NVMe | 2 NVMe ports support via optional Ultra Riser card (AOC-URN2-i2XT) |
| LAN | 4 RJ45 Gigabit Ethernet ports |
| 1 RJ45 Dedicated IPMI LAN port | |
| USB | 5 USB 3.0 Häfen |
| (2 hinteren, 2 via header, 1 Tippe A) | |
| Video | 1 VGA Connector |
| Serielle Schnittstelle / Header | 1 Fast UART 16550 seriell |
| 1 COM port (hinteren) | |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) |
| APM 1.2 | |
| PCI 2.3 | |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
| USB Keyboard support | |
| SMBIOS 2.7.1 | |
| UEFI 2.3.1 | |
| Chassis | |
| Formfaktor | 1U-Rackmount |
| Modell | CSE-119UTS-R751P-T |
| Dimensions and Weight | |
| Höhe | 1.7″ (43mm) |
| Breite | 17.2″ (437mm) |
| Tiefe | 28.5″ (724mm) |
| Bruttogewicht | 48 Pfund (21.8 kg) |
| Available Color | Schwarz |
| Front Panel | |
| Tasten | Power On/Off button |
| System Reset button | |
| LEDs | Power LED |
| Hard drive activity LED | |
| 2 Network activity LEDs | |
| System Overheat LED / Fan fail LED / | |
| UID LED | |
| Erweiterungssteckplätze | |
| PCI-Express | Expansion slots via riser card: |
| 2 PCI-E 3.0 x16, Full-height, 10.5″ Länge | |
| 1 PCI-E 3.0 x8, Low-profile | |
| 1 PCI-E 3.0 x8 SAS3 integrated | |
| Drive Bays | |
| Hot-swap | 8 Hot-swap 2.5″ SAS3 drive bays |
| 2 Hot-swap 2.5″ SATA3-Laufwerksschächte | |
| Optional NVMe support: 2 NVMe via AOC-URN2-I2XT (w/ 2x 10GBase-T ports) | |
| System Cooling | |
| Fans | 8 heavy duty fans with optimal fan speed control |
| Air Shroud | 2 Air Shroud |
| Stromversorgung | |
| 750W Redundant Power Supplies with PMBus | |
| Total Output Power | 750W: 100 – 127Vac |
| 750W: 200 – 240Vac | |
| Abmessungen | 73.5 X 40 X 203 mm |
| (W x H x L) | |
| Eingang | 100-127Vac / 9.5A Max / 50-60Hz |
| 200-240Vac / 4.5A Max / 50-60Hz | |
| +12V | Max: 62.5A / Mindest: 0A |
| 12V SB | Max: 2.1A / Mindest: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Zertifizierung | Platinum Level |
| [ Test Report ] | |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
| CPU Core 6-Phase-switching voltage regulator | |
| LÜFTER | Total of eight 4-pin PWM fans |
| 8x fans with tachometer monitoring | |
| Status monitor for speed control | |
| Status monitor for on/off control | |
| Low noise fan speed control | |
| Temperatur | Monitoring for CPU and chassis environment |
| CPU thermal trip support | |
| Thermal Control for 8x Fan Connectors | |
| PSU I2C temperature sensing logic | |
| Thermal Monitor 2 (TM2) Unterstützung | |
| PECI | |
| LED | Power Fail / Overheat LED |
| Suspend-state Indicator LED | |
| UID LED | |
| Other Features | SDDC Support |
| Operating Environment / Einhaltung | |
| RoHS | RoHS-konform |
| Environmental Spec. | Betriebstemperatur: |
| 10°C to 20°C (50°F to 68°F) | |
| Non-operating Temperature: | |
| -40°C bis 70 °C (-40°F to 158°F) | |
| Operating Relative Humidity: | |
| 8% Zu 90% (nicht kondensierend) | |
| Non-operating Relative Humidity: | |
| 5% Zu 95% (nicht kondensierend) | |
Spezifikation
| Liste der Einzelteile – (Enthaltene Artikel) | |||
| Artikelnummer | Menge | Beschreibung | |
| Hauptplatine / Chassis | MBD-X10DRU-XLL | 1 | Super X10DRU-XLL Motherboard |
| CSE-119UTS-R751P-T | 1 | CSE-119UTS-R751P-T Chassis | |
| Lüfter | LÜFTER-0141L4 | 8 | 40x40x56 mm 20.5K RPM / 17.6K RPM Counter-rotating Fan |
| Air Shroud | MCP-310-81907-0N | 2 | SC819UT PLASTIC AIR SHROUD 16 DIMM |
| Zusatzkarte | AOC-S3108L-H8IR-16DD | 1 | SAS-3, GEN-3 RAID card. Supports 12Gb and R0,1,5,6,10,50 and 60. Includes 2GB memory |
| Zusatzkarte | AOC-UR-I4G-O-P | 1 | 1U Ultra Riser based on Intel i350AM4 controller with 4 GbE RJ45 ports and 1 internal PCI-E x8 3.0 Slot |
| CPU | P4X-DP2689V4L3 | 2 | BDW-EP E5-2689 v4 3.1G 9.6GT 165W R3 2011 M0 |
| Erinnerung | MEM-DR480L-SL02-ER24 | 8 | 8GB DDR4-2400 1Rx4 LP ECC REG DIMM |
| Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management |
| Stromversorgung | PWS-751P-1R | 2 | 1U 750W Redundant Platinum Single Output Power Supply w/Pmbus W73.5xH40xL203mm,RoHS/REACH |
| Optionale Teileliste | |||
| Artikelnummer | Menge | Beschreibung | |
| CacheVault(S) | BTR-CV3108-1U1 | – | CacheVault for Broadcom 3108 with Supercap mounting in 1U 40×56 fan tray |
| BTR-TFM8G-LSICVM02 & BKT-BBU-HALTERUNG-05 | – | CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location | |
| BTR-TFM8G-LSICVM02 & MCP-240-00127-0N | – | CacheVault for Broadcom 3108; Supercap mounting bracket for 2.5″ HDD location | |
| Globale Dienste & Unterstützung | OS4HR3/2/1 | – | 3/2/1-Jahr Vor-Ort-Service rund um die Uhr |
| OSNBD3/2/1 | – | 3/2/1-Jahr Vor-Ort-NBD-Service | |
| Software | SFT-DCMS-Single | 1 | DataCenter-Verwaltungspaket (pro Knotenlizenz) |
Verpackungsinformationen
SuperServer 1028UX-LL3-B8 is sealed in Brocade original box. We will also pack SuperChassis 1028UX-LL3-B8 the second box before shipping.
Sendung
Unsere Produkte werden per FedEx versendet,DHL,TNT,UPS,EMS,und so weiter. aber der käufer ist verantwortlich für
Zollabfertigung und Zahlung des Tarifs, wenn das Produkt im Zielland ankommt.
Versandarten
2-4 Arbeitstage
2-4 Arbeitstage
2-4 Arbeitstage
5-7 Arbeitstage
Bezahlverfahren
T/T,Western Union, HSBC und Money Gram werden akzeptiert. Eine schnellere Zahlung hilft Ihnen, die Artikel früher zu erhalten.
Bewertungen
Es gibt noch keine Bewertungen.