SuperServer 2028UT-BTNRT
| Hauptmerkmale |
| 1. Dual socket R1 (LGA 2011) unterstützt |
| Intel® Xeon® processor E7-8800 v2 |
| / E7-4800 v2 / E7-2800 v2 family |
| (15-Core), w/ QPI up to 8.0 GT/s |
| 2. 2x NVMe HDD bays and 8x Hot-swap |
| 2.5″ SATA3 HDD bays |
| 3. Up to 2TB ECC DDR3, up to 1600MHz; |
| 32x DIMM slots |
| 4. 2x PCI-E 3.0 x16 FH/HL slots, |
| 1x PCI-E 3.0 x8 MicroLP card |
| 5. Dual 10GBase-T ports – Intel® X540 |
| 6. 1280W Redundante Netzteile |
| Platinum Level Digital (95%+) |
| Product SKUs | |
| SYS-2028UT-BTNRT | SuperServer 2028UT-BTNRT (Schwarz) |
| Hauptplatine | |
| Super X10DBT-T | |
| Processor/Cache | |
| CPU | Dual Socket R1 (LGA 2011) |
| Intel® Xeon® processor E7-8800 v2 / E7-4800 v2 / E7-2800 v2 (bis zu 15 Cores and 155W) | |
| Notiz | † BIOS version 3.0 or above is required |
| Cache | Up to 37.5MB |
| System Bus | QPI up to 8 GT/s |
| Systemspeicher | |
| Speicherkapazität | 32x 240-pin DDR3 DIMM slots |
| Up to 2TB DDR3 ECC LRDIMM | |
| Up to 1TB DDR3 ECC Registered memory (RDIMM) | |
| Speichertyp | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| LRDIMM 64GB | |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | |
| On-Board Devices | |
| Chipset | Intel® C602 Chipset |
| SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 |
| SATA 3.0 6Gbps with RAID 0, 1 | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
| ASPEED AST2400 BMC | |
| Network Controllers | Intel® X540 Dual Port 10GBase-T Controller |
| Virtual Machine Device Queues reduce I/O overhead | |
| Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
| 1x Realtek RTL8211E PHY (dedicated IPMI) | |
| Grafik | ASPEED AST2400 BMC |
| Eingang / Output | |
| SATA3 | Customizable storage |
| 8x SATA 3.0 Häfen (6Gbit/s) | |
| LAN | 2x RJ45 10GBase-T LAN ports |
| 1x RJ45 Dedicated IPMI LAN port | |
| USB | 2x USB 2.0 ports total (2x rear) |
| VGA | 1x VGA port |
| Serielle Schnittstelle / Header | 1x Fast UART 16550 Hafen / 1 Header |
| Chassis | |
| Formfaktor | 2U-Rackmount |
| Modell | CSE-227HD-R1K28B |
| Dimensions and Weight | |
| Breite | 17.2″ (437mm) |
| Höhe | 3.5″ (89mm) |
| Tiefe | 28.6″ (726mm) |
| Bruttogewicht | 50 Pfund (22.7kg) |
| Verfügbare Farben | Schwarz |
| Front Panel | |
| Tasten | Power On/Off button |
| System Reset button | |
| UID button | |
| LEDs | Power status LED |
| HDD activity LED | |
| 2x Network activity LEDs | |
| Universal Information (UID) LED | |
| Erweiterungssteckplätze | |
| PCI-Express | 2x PCI-E 3.0 x16 slots (FH/HL) |
| 1x PCI-E 3.0 x8 MicroLP card | |
| Drive Bays | |
| Hot-swap | 8x Hot-swap 2.5″ SATA3 HDD bays |
| NVMe | 2x NVMe drive bays |
| Rückwandplatine | |
| 1x SAS/SATA Backplane | |
| System Cooling | |
| Fans | 4x 80mm 4-pin PWM fans |
| Stromversorgung | |
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
| AC Input | 1000W Output @ 100-140V, 8-12A, 50-60Hz |
| 1280W Output @ 180-240V, 6-8A, 50-60Hz | |
| DC Output | 1000W: +12V/83A; +5Vsb/4A |
| 1280W: +12V/106.7A, +5Vsb/4A | |
| Zertifizierung | |
| Platinum Certified | |
| [ Test Report ] | |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) |
| APM 1.2 | |
| PCI 2.2 | |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
| BIOS resuce hot keys | |
| USB Keyboard support | |
| SMBIOS 2.3 | |
| UEFI | |
| Operating Environment / Einhaltung | |
| RoHS | RoHS-konform |
| Environmental Spec. | Betriebstemperatur: |
| 10°C to 35°C (50°F to 95°F) | |
| Non-operating Temperature: | |
| -40°C bis 70 °C (-40°F to 158°F) | |
| Operating Relative Humidity: | |
| 8% Zu 90% (nicht kondensierend) | |
| Non-operating Relative Humidity: | |
| 5% Zu 95% (nicht kondensierend) | |
Spezifikation
| Liste der Einzelteile – (Enthaltene Artikel) | |||
| Artikelnummer | Menge | Beschreibung | |
| Hauptplatine / Chassis | MBD-X10DBT-T | 2 | Super X10DBT-T Motherboard |
| CSE-227HD-R1K28B | 1 | 2U-Chassis | |
| Air Shroud | MCP-310-22701-0B | 2 | Mylar airshroud for SC227 in X10DBT,RoHS/REACH |
| Rückwandplatine | BPN-ADP-8SATA3-1UBL | 2 | ,RoHS/REACH,PBF Left 1U adapter card for BigTwin, 8x SATA3 ports |
| Rückwandplatine | BPN-ADP-8PCIE3-1UBR-P | 2 | Right 1U adapter card for BigTwin, 8x PCIe gen3 lanes |
| Rückwandplatine | BPN-SAS3-227HD-N2 | 1 | 20-port 2U Big Twin SAS3 CSE-227HD (8 Festplatte + 2 NVMe per node) backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices |
| Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Label | LBL-0968 | 1 | Pack of 4 NVMe label for Gen 3, 2.5 inch HDD Tray,RoHS/REACH |
| Manual | MNL-1603-QRG | 1 | SYS-2028UT-BTNRT/BC1NRT, QRG,HF,RoHS/REACH |
| Riser Card | RSC-R1UW-2E16 | 2 | 1U LHS WIO Riser card with two PCI-E x16 slots |
| Kühlkörper / Zurückbehaltung | SNK-P0057PS | 4 | 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
| Stromversorgung | PWS-1K28P-SQ | 2 | 1U 1280W, redundant single output power supply |
| Rail Set | MCP-290-00053-0N | 1 set | Rail set, quick/quick, default for 2,3U 17.2″W |
| Software | SFT-OOB-LIC | 2 | License key for enabling OOB BIOS management |
Verpackungsinformationen
SuperServer 2028UT-BTNRT is sealed in Brocade original box. We will also pack SuperChassis 2028UT-BTNRT the second box before shipping.
Sendung
Unsere Produkte werden per FedEx versendet,DHL,TNT,UPS,EMS,und so weiter. aber der käufer ist verantwortlich für
Zollabfertigung und Zahlung des Tarifs, wenn das Produkt im Zielland ankommt.
Versandarten
2-4 Arbeitstage
2-4 Arbeitstage
2-4 Arbeitstage
5-7 Arbeitstage
Bezahlverfahren
T/T,Western Union, HSBC und Money Gram werden akzeptiert. Eine schnellere Zahlung hilft Ihnen, die Artikel früher zu erhalten.
Bewertungen
Es gibt noch keine Bewertungen.