The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired and wireless on a single platform. Cisco’s Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), modular and field-replaceable network modules, redundant fans and power supplies.
Cisco next generation Catalyst WS-C3850-48PW-S is integrated with 48 Ethernet POE ports stackable enterprise level switch with IP base IOS image which delivers full layer 2 and limited layer 3 capabilities in order to offer the feasible solution for distribution layer.
Specification
WS-C3850-48PW-S |
|
model info: |
WS-C3850-48PW-S |
enclosure type |
Rack-mountable – 1U |
Ports |
48 x 10/100/1000 (POE+) |
Network management Interface |
● Ethernet management port: RJ-45 connectors, 4-pair Cat-5 UTP cabling |
Available PoE Power |
435W |
Switching Capacity |
176Gbps |
Maximum stacking number |
up to 9 switches with same IOS feature set in same series |
Stack Bandwidth |
480Gbps |
Forwarding Performance |
130.95Mpps |
FNF (Flexible NetFlow) entries |
48,000 flows |
Maximum VLANs IDs |
1000 |
MAC Address Table Size |
32K |
CPU |
Multicore CPU |
RAM |
4 G |
Flash Memory |
2 G |
Wireless |
|
Number of AP per switch/stack |
100 |
Number of wireless clients per switch/stack |
2000 |
Total number of WLANs per switch |
64 |
Wireless bandwidth per switch |
up to 40Gbps |
Supported Aironet AP series |
3600, 3500, 2600, 1600, 1260, 1140, 1040 |
Expansion / Connectivity |
|
Console ports |
USB (Type-B), Ethernet (RJ-45) |
Expansion Slot(s) |
1 network module slot and 1 power redundant slot |
Network Modules Selection |
● C3850-NM-4-1G: 4 x 1G uplinks network module |
Stacking cable |
●STACK-T1-50CM StackWise stacking cable with a 0.5 m length |
Stack Power Cable (recommended) |
●CAB-SPWR-30CM stack power cable with a 30CM length |
Power supply |
PWR-C1-715WAC |
Power Device |
Power supply – redundant – plug-in module |
Power Redundancy |
optional |
Voltage range (Auto) |
100V-240V |
Power Consumption of standalone(in Watts) |
135.96 (Max) |
Miscellaneous |
|
Width |
17.5 Inches (44.5 cm) |
Depth |
17.7 Inches (44.5 Cm) |
Height |
1.75 Inches (4.45 cm) |
Weight |
17.4 Pounds (7.9Kg) |
Rack Mounting Kit |
optional |
MTBF in hours |
241,050 |
Compliant Standards |
● IEEE 802.1D Spanning Tree Protoco ● IEEE 802.3 10BASE-T |
System software / license |
|
System software |
IOS IP Base (Upgradable) |
EnergyWise license |
ENERGY-MGMT, ENERGY-MGT-100-K9 |
Software license |
●C3850-48-S-E: IP Base to IP Services RTU paper license |
Access Point Licenses |
●5 Access Point licenses bundled ●L-LIC-CT3850-UPG: Primary upgrade license SKU for Cisco 3850 wireless controller (e-delivery) |
Features |
● RPS Support ● IP service-level agreements (SLAs) ● Advanced IP unicast routing protocols ● Jumbo Frames ● VLANS ●Voice Vlan ●VTPv2 ●CDPv2 ●LLDP ● 802.3ad LACP and PAgP ● PVST/PVST+ ● 802.1W/802.1S ●Port Fast/Uplink Fast ●Dynamic Trunking Protocol (DTP) ● port CoS Trust and Override ● Trusted Boundary ● ACL Classification ●ingress Policing ● Auto QoS ● Per VLAN policies ● 802.1p queues ● Scheduling ● Priority Queuing ● Configure CoS Priority Queues ●Configure CoS Priority Queues ● Configure Queue Weights ● Configure Buffers and Thresholds ●Class & Policy Maps ● Modify CoS and DSCP Mapping ● Weighted Tail Drop ● IGMPv1,v2,v3 and MLDv1, v2 ● DHCP server ● DSCP transparency ● HSRP, VRRP, BLGP ● RIPv1, v2 EIGRP, PIM OSPF, OSPFv3,EIGRPv6, BGPv4, IS-ISv4 ● VRF-lite ● PIM-SM/DM, PIM sparse-dense mode, SSM ● Flexible Netflow |
Advanced Network security |
● Port security ● DHCP snooping ●Dynamic ARP inspection (DAI) ● IP source guard ●The Unicast Reverse Path Forwarding (uRPF) |
Management |
●BRIDGE-MIB ●CISCO-AUTH-FRAMEWORK-MIB ●CISCO-SNMP-TARGET-EXT-MIB ●CISCO-STACKMAKER-MIB |
Technical Support and Services |
● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco SP Base Service ● Cisco Focused Technical Support Services |
Environmental Ranges |
|
With AC power supply Operating environment and altitude |
|
Operating temperature up to 5000 ft (1500 m) |
23ºF to 113ºF (-5ºC to +45ºC) |
Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF (-5ºC to +40ºC) |
Short-term exception at sealevel with single fan failure |
23ºF to 113ºF (-5ºC to +45ºC) |
Short-term exception up to 5000 feet (1500 m) |
23ºF to 122ºF (-5ºC to 50ºC) |
Short-term exception up to 10,000 feet (3000 m) |
23ºF to 113ºF (-5ºC to 45ºC) |
With DC power supply Operating environment and altitude (NEBS) |
|
Operating temperature up to 6000 ft (1800 m) |
23ºF to 113ºF (-5ºC to +45ºC) |
Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF (-5ºC to +40ºC) |
Operating temperature up to 13,000 ft (4000m) |
23ºF to 95ºF (-5ºC to 35ºC) |
Short-term exception up to 6,000 feet (1800 m) |
23ºF to 131ºF (-5ºC to +55ºC) |
Short-term exception up to 10,000 feet (3000 m) |
23ºF to 122ºF (-5ºC to +50ºC) |
Short-term exception up to 13,000 feet (4000 m) |
23ºF to 113ºF (-5ºC to +45ºC) |
Short-term exception at sealevel with single fan failure |
23ºF to 113ºF (-5ºC to +45º) |
Storage environment |
-40ºF to 160ºF (-40ºC to 70ºC) |
Operating altitude |
Up to 13,000 Feet (Up to 4000 Meters) |
Storage altitude |
Up to 15,000 Feet (Up to 4573 Meters) |
Operating relative humidity |
10% to 95% noncondensing |
Storage relative humidity |
10% to 95% noncondensing |
Packing Information
Cisco Catalyst 3850 Series Layer 3 Switch WS-C3850-48PW-S is sealed in cisco original box. We will also pack WS-C3850-48PW-S with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Reviews
There are no reviews yet.