The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired and wireless on a single platform. Cisco’s Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), modular and field-replaceable network modules, redundant fans and power supplies.
Cisco WS-C3850-48UW-S supports Stackable 48 10/100/1000 Cisco UPOE ports, 1 network module slot, 1100 W power supply, 5-access point license and 1RU chassis.
Specification
WS-C3850-48UW-S | |
---|---|
Description | Cisco Catalyst 3850 24-port UPOE IP Base with 5-access point license |
Enclosure type | Rack-mountable – 1U |
Ports | Stackable 48 10/100/1000 Cisco UPOE ports |
Network management Interface | ● Ethernet management port: RJ-45 connectors, 4-pair Cat-5 UTP cabling |
● Management console port: RJ-45-to-DB9 cable for PC connections | |
Available PoE Power | 800W |
Maximum stacking number | up to 9 switches with same IOS feature set in same series |
Stack Bandwidth | 480Gbps |
CPU | Multicore CPU |
RAM | 4 G |
Flash Memory | 2 G |
Wireless | |
Number of AP per switch/stack | 100 |
Number of wireless clients per switch/stack | 2000 |
Total number of WLANs per switch | 64 |
Wireless bandwidth per switch | up to 20Gbps |
Supported Aironet AP series | 3600, 3500, 2600, 1600, 1260, 1140, 1040 |
Expansion / Connectivity | |
Console ports | USB (Type-B), Ethernet (RJ-45) |
Expansion Slot(s) | 1 network module slot and 1 power redundant slot |
Network Modules Selection | C3850-NM-4-1G |
C3850-NM-2-10G | |
C3850-NM-4-10G | |
Stacking cable | ●STACK-T1-50CM StackWise stacking cable with a 0.5 m length |
●STACK-T1-1M StackWise stacking cable with a 1.0 m length | |
●STACK-T1-3M StackWise stacking cable with a 3.0 m length | |
Stack Power Cable (recommended) | ●CAB-SPWR-30CM stack power cable with a 30CM length |
●CAB-SPWR-150CM stack power cable with a 150CM length | |
Power supply | PWR-C1-1100WAC/2= |
Power Device | Power supply – redundant – plug-in module |
Power Redundancy | optional |
Voltage range (Auto) | 100V-240V |
Power Consumption of standalone(in Watts) | 84.97 (max) |
Miscellaneous | |
Dimensions (H x W x D) | 1.75 x 17.5 x 19.2 inch; 4.45 x 44.5 x 48.8 cm |
Rack Mounting Kit | optional |
MTBF in hours | 205,110 |
Compliant Standards | ● IEEE 802.1D Spanning Tree Protoco |
● IEEE 802.1p CoS Prioritization | |
● IEEE 802.1Q VLAN | |
● IEEE 802.1s | |
● IEEE 802.1w | |
● IEEE 802.1X | |
● IEEE 802.1X-Rev | |
●IEEE 802.11 | |
● IEEE 802.1ab (LLDP) | |
● IEEE 802.3ad | |
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports | |
● IEEE 802.3 10BASE-T | |
● IEEE 802.3u 100BASE-TX | |
● IEEE 802.3ab 1000BASE-T | |
● IEEE 802.3z 1000BASE-X | |
● RMON I and II standards | |
● SNMP v1, v2c, and v3 | |
System software / license | |
System software | IOS IP Base |
EnergyWise license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
Features | ●RPS Support ● Jumbo Frames ● VLANS ●Voice Vlan ●VTPv2 ●CDPv2 ●LLDP ● 802.3ad LACP and PAgP |
● PVST/PVST+ ● 802.1W/802.1S ●Port Fast/Uplink Fast ●Dynamic Trunking Protocol (DTP) ● port CoS Trust | |
and Override ● Trusted Boundary ● ACL Classification ●ingress Policing ● Auto QoS ● Per VLAN policies | |
● 802.1p queues ● Scheduling ● Priority Queuing ● Configure CoS Priority Queues ●Configure CoS Priority | |
Queues ● Configure Queue Weights ● Configure Buffers and Thresholds ●Class & Policy Maps ● Modify CoS | |
and DSCP Mapping ● Weighted Tail Drop ● IGMPv1,v2,v3 and MLDv1, v2 ● DHCP server ● DSCP transparency | |
● HSRP, VRRP, BLGP ● RIPv1, v2 EIGRP, PIM OSPF, OSPFv3, EIGRPv6, BGPv4, IS-ISv4 ● VRF-lite ● PIM-SM/DM, | |
PIM sparse-dense mode, SSM ● Flexible Netflow | |
Advanced Network security | ● Port security ● DHCP snooping ●Dynamic ARP inspection (DAI) ● IP source guard ●The Unicast Reverse Path Forwarding (uRPF) |
● Bidirectional data support on a SPAN ● User authentication | |
● Private VLAN ●Router and VLAN ACLs ● complete identity and security | |
● Multidomain authentication ● MAC address notification | |
● IGMP filtering ● Cisco security VLAN ACL | |
● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) | |
● Port-based ACLs ● TrustSec SXP ● IEEE 802.1ae | |
● TACACS+ and RADIUS authentication ● Cisco standard and extended IP security router ACLs | |
● Bridge protocol data unit (BPDU) Guard | |
● Spanning Tree Root Guard (STRG) ● Wireless end-to-end security | |
Management | ●BRIDGE-MIB ●CISCO-AUTH-FRAMEWORK-MIB |
●CISCO-BGP4-MIB, BGP4-MIB ●CISCO-BRIDGE-EXT-MIB | |
●CISCO-BULK-FILE-MIB ●CISCO-CABLE-DIAG-MIB | |
●CISCO-CALLHOME-MIB ●CISCO-CEF-MIB | |
●CISCO-CIRCUIT-INTERFACE-MIB | |
●CISCO-ENTITY-VENDORTYPE-OID-MIB | |
●CISCO-CONTEXT-MAPPING-MIB | |
●CISCO-DEVICE-LOCATION-MIB ●CISCO-DHCP-SNOOPING-MIB | |
●CISCO-EIGRP-MIB | |
●CISCO-EMBEDDED-EVENT-MGR-MIB | |
●CISCO-ENTITY-FRU-CONTROL-MIB ●CISCO-ENTITY-SENSOR-MIB | |
●ENTITY-MIB ●CISCO-ERR-DISABLE-MIB | |
●CISCO-CONFIG-COPY-MIB ●CISCO-FLOW-MONITOR-MIB | |
●CISCO-FTP-CLIENT-MIB ●CISCO-HSRP-EXT-MIB | |
●CISCO-HSRP-MIB ●CISCO-IETF-ISIS-MIB | |
●CISCO-IF-EXTENSION-MIB ●CISCO-IGMP-FILTER-MIB | |
●CISCO-CONFIG-MAN-MIB ●CISCO-IP-CBR-METRICS-MIB | |
●CISCO-IPMROUTE-MIB ●CISCO-IP-STAT-MIB | |
●CISCO-IP-URPF-MIB ●CISCO-L2L3-INTERFACE-CONFIG-MIB | |
●CISCO-LAG-MIB ●CISCO-LICENSE-MGMT-MIB | |
●CISCO-MAC-AUTH-BYPASS-MIB ●CISCO-MAC-NOTIFICATION-MIB | |
●CISCO-MDI-METRICS-MIB ●CISCO-FLASH-MIB ●CISCO-OSPF-MIB | |
●CISCO-OSPF-TRAP-MIB ●CISCO-PAE-MIB ●CISCO-PAGP-MIB | |
●CISCO-PIM-MIB ●CISCO-PING-MIB ●CISCO-PORT-QOS-MIB | |
●CISCO-PORT-SECURITY-MIB●CISCO-PORT-STORM-CONTROL-MIB | |
●CISCO-POWER-ETHERNET-EXT-MIB ●CISCO-PRIVATE-VLAN-MIB | |
●CISCO-PROCESS-MIB ●CISCO-PRODUCTS-MIB●CISCO-RF-MIB | |
●CISCO-RTP-METRICS-MIB ●CISCO-RTTMON-MIB | |
●CISCO-SMART-INSTALL-MIB | |
●CISCO-SNMP-TARGET-EXT-MIB ●CISCO-STACKMAKER-MIB | |
●CISCO-MEMORY-POOL-MIB ●CISCO-STP-EXTENSIONS-MIB | |
●CISCO-SYSLOG-MIB ●CISCO-TCP-MIB ●CISCO-UDLDP-MIB | |
●CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB ●CISCO-VLAN-MEMBERSHIP-MIB ●CISCO-VTP-MIB ●EtherLike-MIB | |
●HC-RMON-MIB ●IEEE8021-PAE-MIB ●IEEE8023-LAG-MIB | |
●IF-MIB ●IGMP-MIB ●IGMP-STD-MIB ●IP-FORWARD-MIB | |
●IP-MIB ●IPMROUTE-STD-MIB ●LLDP-EXT-MED-MIB | |
●LLDP-MIB ●NOTIFICATION-LOG-MIB | |
●OLD-CISCO-MEMORY-MIB ●CISCO-CDP-MIB | |
●POWER-ETHERNET-MIB ●RMON2-MIB | |
●RMON-MIB ●SNMP-COMMUNITY-MIB ●SNMP-FRAMEWORK-MIB | |
●SNMP-MPD-MIB ●SNMP-NOTIFICATION-MIB ●SNMP-PROXY-MIB | |
●SNMP-TARGET-MIB ●SNMP-USM-MIB ●SNMPv2-MIB | |
●SNMP-VIEW-BASED-ACM-MIB ●TCP-MIB ●UDP-MIB | |
●CISCO-IMAGE-MIB ●CISCO-STACKWISE-MIB | |
●AIRESPMACE-WIRELESS-MIB ●CISCO-LWAPP-IDS-MIB | |
●CISCO-LWAPP-AP-MIB ●CISCO-LWAPP-CCX-RM-MIB | |
●CISCO-LWAPP-CLIENT-ROAMING-MIB | |
●CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB | |
●CISCO-LWAPP-DOT11-CCX-CLIENT-MIB | |
●CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB | |
●CISCO-LWAPP-DOT11-CLIENT-MIB ●CISCO-LWAPP-DOT11-MIB | |
●CISCO-LWAPP-DOWNLOAD-MIB ●CISCO-LWAPP-LINKTEST-MIB | |
●CISCO-LWAPP-MFP-MIB ●CISCO-LWAPP-MOBILITY-EXT-MIB | |
●CISCO-LWAPP-QOS-MIB ●CISCO-LWAPP-REAP-MIB | |
●CISCO-LWAPP-ROGUE-MIB ●CISCO-LWAPP-RRM-MIB | |
●CISCO-LWAPP-SI-MIB ●CISCO-LWAPP-TSM-MIB | |
●CISCO-LWAPP-WLAN-MIB ●CISCO-LWAPP-WLAN-SECURITY-MIB | |
Technical Support and Services | ● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco SP Base Service ● Cisco Focused Technical Support Services |
Packing Information
Cisco Catalyst 3850 Series Layer 3 Switch WS-C3850-48P-S is sealed in cisco original box. We will also pack WS-C3850-48P-S with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Reviews
There are no reviews yet.