4G LTE can provide either primary connectivity or backup communications, offering network resiliency for business continuity. With greater agility and speed to deployment than wired solutions, 4G LTE can reduce network cost, and it complements wireline public and private network access. Practical applications of 4G LTE for organizations include parallel networks, primary connection, failover, in-vehicle connectivity, network convergence, and last-mile diversity. The 4G LTE NIM with the Cisco 4000 series Integrated Services Router leads the industry in bringing enterprise grade functions such as Quality of Service (QoS), Multi-Virtual Route Forwarding (Multi-VRF) , advanced VPN, and Unified Communications solutions over LTE.
The Cisco 4G LTE NIMs (Figure 1) provide an enterprise-class 4G multimode LTE wireless WAN (WWAN) solution. With Cisco ISRs, 4G LTE is a powerful primary WAN access solution. Businesses can now run applications such as interactive video and telepresence on a primary 4G LTE connection, which is up to 50 times faster with far lower latency than third-generation (3G) links. These 4G modules support the latest Third-Generation Partnership Project (3GPP) Release 9 LTE standards. Cisco 4G multimode LTE WWAN NIMs provide persistent, reliable LTE connectivity with fallback and transparent handoff to earlier technologies.
The cards provide bandwidth to support high-definition (HD) and peer-to-peer (P2P) video calls, providing customers with an excellent mobile broadband experience. The Cisco 4G LTE WWAN NIMs are tightly integrated with the services provided on the award-winning Cisco 4000 Series ISR devices, which deliver secure data, voice, video, and mobility services. The Cisco 4G LTE WWAN NIMs are supported on the modular Cisco 4200, 4300 and 4400 Series ISR devices.
Enterprises are looking for ways to reduce deployment time, enable comprehensive media services, increase revenue, and improve business continuity. The Cisco 4G LTE WWAN NIMs, when coupled with a service provider’s wireless data plan, provide a rapidly deployable, high-bandwidth, reliable, and secure solution for branch offices and remote sites. With 4G LTE data rates, the Cisco 4G LTE WWAN NIMs offer a primary WAN link solution capable of running comprehensive branch-office services, including voice and video services.
The Cisco LTE WWAN NIMs include the following models:
● Cisco LTE 2.0 NIM for Global (NIM-4G-LTE-GA): Multimode LTE for carriers that operate LTE on 800-MHz (band 20), 900-MHz (band 8), 1800-MHz (band 3), 2100-MHz (band 1), or 2600-MHz (band 7) networks; the multimode LTE Global (Europe, Australia, etc.) NIMs are backward-compatible with 3G Dual-Cell-high-speed packet access plus (DC-HSPA+), high-speed packet access plus (HSPA+), high-speed packet access (HSPA), Universal Mobile Telecommunications Service (UMTS), Enhanced Data GSM Environment (EDGE), and General Packet Radio Service (GPRS).
● Cisco LTE 2.0 NIM for North America (NIM-4G-LTE-NA): Multimode LTE for carriers that operate LTE on PCS 1900-MHz (band 2), 850 MHz (band 5), 1700- or 2100-MHz (band 4 AWS), or 700-MHz (band 17); the multimode LTE North America (AT&T, Canada) NIMs are backward-compatible with DC-HSPA+, HSPA+, HSPA, UMTS, EDGE, and GPRS
● Cisco LTE 2.0 NIM for Sprint (NIM-4G-LTE-ST) and Cisco LTE 2.0 4G NIM for Verizon (NIM-4G-LTE-VZ): Multimode LTEs for carriers that operate LTE on 700-MHz (band 13), 1700- or 2100-MHz(band 4 AWS), or extended PCS 1900-MHz (band 25); the multimode NIMs are backward-compatible with EVDO A/CDMA 1X BC0, BC1, and BC10
| General | |
|---|---|
| Device Type | Wireless cellular modem |
| Form Factor | Internal |
| Built-in Devices | GPS |
| Localization | Australia, Europe |
| Modem | |
| Connectivity Technology | Wireless |
| Processor | Qualcomm MDM9215 |
| Max Transfer Rate | 100 Mbps |
| Cellular Band | LTE 800/900/1800/2100/2600 / HSPA+ 850/900/1900/2100 |
| Cellular Protocol | GPRS, UMTS, EDGE, HSPA+, LTE, DC-HSPA+ |
| Networking | |
| Remote Management Protocol | SNMP 2 |
| Features | MIMO technology, Management Information Base (MIB), WWAN support |
| Expansion / Connectivity | |
| Interfaces | 2 x antenna – TNC 1 x antenna – SMA 1 x micro-USB |
| Miscellaneous | |
| SIM Card Supported | Regular (mini-SIM) x 1 |
| Compliant Standards | CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN 301.489.1, AS/NZS 60950-1, RSS-102, FCC Part 15, EN300-386, FCC Part 2, UL 60950-1, IEC 60950-1, EN 60950-1, RSS-132, EN 301.489.7, EN 301.511, RSS-129, RSS-133, FCC Part 22, FCC Part 24, CAN/CSA C22.2 No. 60950-1, VCCI V-3, AS/NZS CISPR 22, CNS 13438, EN 50385, EN 301.489-24 |
| Manufacturer Warranty | |
| Service & Support | One-Year |
| Width | 3.5 in |
| Depth | 7.3 in |
| Height | 1.3 in |
| Weight | 9.52 oz |
Packing Information
Cisco 4G LTE 2.0 Network Interface Modules NIM-4G-LTE-GA is sealed in cisco original box. We will also pack NIM-4G-LTE-GA with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Shipping Methods
2-4 business days
2-4 business days
2-4 business days
5-7 business days
Payment Method
T/T,Western Union, HSBC and Money Gram will be accepted.Faster payment will help you to get the items earlier.
Reviews
There are no reviews yet.