Cisco provides two modes of operation for Cisco Nexus 9000 Series Switches. Organizations can deploy Cisco Application Centric Infrastructure (Cisco ACI™) or Cisco Nexus switch environments (Cisco NX-OS mode). The Cisco ACI solution is a holistic, intent-driven architecture with centralized automation and policy-based application profiles. It provides a robust, transport network for dynamic workloads and is built on a network fabric that combines time-tested protocols with new innovations to create a highly flexible, scalable, and resilient architecture of low-latency, high-bandwidth links. This fabric delivers a network that can support the most demanding and flexible data center environments.
The Cisco Nexus 9364C-GX switch (N9K-C9364C-GX) is a 2-rack unit (RU), fixed-port switch designed for spine-leaf-APIC deployment in data centers.
This switch has the following ports:
-
64 100-Gigabit QSFP28 ports
-
Two management ports (one RJ-45 port and one SFP port)
-
One console port
-
1 USB port
Port considerations:
-
Odd numbered ports (i.e. all ports on row 1) will support breakout – even numbered ports on row 2 will be disabled. This is applicable to 1/1-60.
-
The last 2 ports (1/63-64) are reserved for the default fabric links. These Ports will be used for most discovery considerations, documented below.
-
1/61-62 can be converted to down-link ports but breakout is not supported. That is because 1/61-64 belong to the same MAC quad in the ASIC and you can’t mix breakout ports and non-breakout ports in the same MAC quad.
-
This 4 ports per MAC quad consideration is applicable to 1/1-60 as well (for example, if 1/1 is breakout enabled, 1/3 must be breakout enabled too. – 1/2 and 1/4 are error-disabled).
N9K-C9364C-GX Specification
Item | Specifications |
---|---|
Device | N9K-C9364C-GX |
Ports | ● 64 x 100/40-Gbps QSFP28 ports |
Supported speeds | ● 40/100-Gbps |
● Breakout supported: | |
● 2×50, 2×25, 2×10 on all ports | |
● 4×10, 4x25G on all odd numbered ports | |
● 10G w/QSA | |
CPU | ● 4 cores |
System memory | ● Up to 32 GB |
SSD Drive | ● 128 GB |
System buffer | ● 80 MB |
Management ports | ● 2 ports: 1 RJ-45 and 1 SFP |
USB Ports | ● 1 |
RS-232 serial ports | ● 1 |
Power Supplies | ● 2000W AC, 2000W DC, 2000W HVAC/HVDC |
Typical power (AC) | ● 811W |
Maximum power (AC) | ● 1622W |
Input voltage (AC) | ● 100 to 240V |
Input voltage | ● 100 to 277V |
(High-Voltage AC [HVAC]) | |
Input voltage (DC) | ● –40 to –72V |
Input voltage | ● –240 to –380V |
(High-Voltage DC [HVDC]) | |
Frequency (AC) | ● 50 to 60 Hz |
Fans | ● 3+1 redundancy |
Airflow | ● Port-side intake and exhaust |
Physical dimensions | ● Dimensions (H x W x D): 3.39 x 17.41 x 22.59 in. (8.61 x 44.23 x 57.4 cm) |
(H x W x D) | |
Acoustics | ● 77.3 dBA at 50% fan speed, 88.6 dBA at 70% fan speed, and 95.8 dBA at 100% fan speed |
RoHS compliance | ● Yes |
Mean Time Between Failure (MTBF) | ● 237,760 hours |
Minimum ACI image | ● ACI-N9KDK9-14.2(3) |
Minimum NX-OS image | ● NXOS-9.3.3 |
Maximum number of IPv4 Longest Prefix Match (LPM) routes** | 896,000 |
Maximum number of IPv4 host entries** | 896,000 |
Maximum number of MAC address entries** | 256,000 |
Maximum number of multicast routes | 32,000 |
Number of Internet Group Management Protocol (IGMP) snooping groups | Shipping: 8000 |
Maximum: 32,000 | |
Maximum number of Access-Control-List (ACL) entries | Per slice of the forwarding engine: |
● 5000 ingress | |
● 2000 egress | |
● Max: 20,000 ingress, 8000 egress | |
Maximum number of VLANs | 4096*** |
Number of Virtual Routing and Forwarding (VRF) instances | Shipping: 1000 |
Maximum: 16,000 | |
Maximum number of ECMP paths | 64 |
Maximum number of port channels | 512 |
Maximum number of links in a port channel | 32 |
Number of active SPAN sessions | 4 |
Maximum number of VLANs in Rapid per-VLAN Spanning Tree (RPVST) instances | 3967 |
Maximum number of Hot-Standby Router Protocol (HSRP) groups | 490 |
Maximum number of Multiple Spanning Tree (MST) instances | 64 |
Flow-table size used for Cisco Tetration Analytics platform | 64,000 |
Number of Network Address Translation (NAT) entries | 1023 |
Packing Information
Cisco Nexus 9300 Series switch N9K-C9364C-GX is sealed in cisco original box. We will also pack N9K-C9364C-GX with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Reviews
There are no reviews yet.