Cisco Nexus 5672UP-16G switch (N5K-C5672UP-16G) is a compact 1RU (1 Rack Unit), high-performance, low-latency 1/10/40-Gigabit Ethernet, Fibre Channel, and Fibre Channel over Ethernet (FCoE) switch. It runs the industry-leading Cisco NX-OS Software operating system, providing features and capabilities that are widely deployed.
shows the Quick Specs.
| Product Code | N5K-C5672UP-16G |
| Performance | Layer 2 and 3 hardware forwarding at 1.44 Tbps; 1071 mpps (64-byte packets) |
| Form factor | 1-rack unit |
| Power Supplies | two 1+1 redundant, hot-swappable power supplies |
| Fan Modules | 3 |
| Airflow | supporting both port-side intake (red handle) and fan-side intake (blue handle) airflow options for flexible mounting |
| 10 GE | 48 ports |
| 40 GE | 6 true QSFP ports |
| Ports | 48 fixed 1 Gigabit and 10 Gigabit Ethernet ports of which 24 ports can be unified ports (UP) |
| 10 and 40 Gbps FCoE | Yes |
| Hardware VXLAN | Yes |
| NVGRE capable | Yes |
| Latency | 1 microsecond |
| Physical (height x width x depth) | 1.75 x 17.3 x 30 in. (4.4 x 43.9 x 76.2 cm) |
| Weight | 32 lb (2 power supplies) |
Specification
| N5K-C5672UP-16G Specification | |
|---|---|
| Form factor | 1-rack unit |
| Number of ports | Up to 1152 with FEX |
| 10 GE | 48 ports |
| 40 GE | 6 true QSFP ports |
| Unified ports | 24 ports (Ethernet; FCoE; 2/4/8-gigabit FC) |
| 10 and 40 Gbps FCoE | Yes |
| Hardware VXLAN | Yes |
| NVGRE capable | Yes |
| Latency | 1 microsecond |
| Performance | ● Layer 2 and 3 hardware forwarding at 1.44 Tbps; 1071 mpps (64-byte packets) |
| ● Support for up to 256,000 combined entries of MAC addresses and Address Resolution Protocol (ARP) entries | |
| ● Low latency of approximately 1 microsecond using cut-through forwarding for predictable, consistent traffic latency regardless of packet size, traffic pattern, or features enabled on 10 and 40 Gigabit Ethernet interfaces | |
| ● 25-MB buffer per 12 x 10 Gigabit Ethernet SFP+ interfaces | |
| ● Line-rate traffic throughput on all ports in Layer 2 and 3 mode | |
| Interfaces | ● 48 fixed 1/10 Gigabit Ethernet SFP+ ports with 24 of the 48 ports being unified, and 6 fixed 40 Gigabit Ethernet QSFP+ ports with 10 and 40 Gigabit Ethernet FCoE support on all respective ports and 2/4/8-Gbps Fibre Channel on all the unified ports |
| ● Expansion module: 24 SFP+ unified ports plus 2 x 40 Gigabit Ethernet QSFP+ ports | |
| ● Conversion of 40 Gigabit Ethernet ports to 10 Gigabit Ethernet interfaces through QSFP+ breakout cable | |
| ● Fabric extension through the Cisco Nexus 2200 and 2300 platforms | |
| Layer 2 Features | ● Layer 2 switch ports and VLAN trunks |
| ● IEEE 802.1Q VLAN encapsulation | |
| ● Support for up to 4000 VLANs | |
| ● Support for up to 4000 access control list (ACL) entries | |
| ● Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible) | |
| ● Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s): 64 instances | |
| ● Spanning Tree PortFast | |
| ● Spanning Tree root guard | |
| ● Spanning Tree Bridge Assurance | |
| ● Cisco EtherChannel technology (up to 16 ports per EtherChannel) | |
| ● Cisco vPC technology | |
| ● vPC configuration synchronization | |
| ● vPC shutdown | |
| ● Link Aggregation Control Protocol (LACP): IEEE 802.3ad | |
| ● Advanced port-channel hashing based on Layer 2, 3, and 4 information | |
| ● Jumbo frames on all ports (up to 9216 bytes) | |
| ● Pause frames (IEEE 802.3x) | |
| ● Storm control (unicast, multicast, and broadcast) | |
| ● Private VLANs | |
| ● Private VLAN over trunks (isolated and promiscuous) | |
| ● Private VLANs over vPC and EtherChannels | |
| ● VLAN remapping | |
| ● FabricPath | |
| ● EvPC and vPC+ with FabricPath | |
| ● Adapter FEX | |
| ● Data Center VM-FEX | |
| ● Support for up to 24 fabric extenders (Layer 2) with each Cisco Nexus 5672UP, 5672UP-16G, and 56128P Switch | |
| ● RDMA over Converged Ethernet (RoCE) using Data Center Bridging (DCB) support (DCB Exchange [DCBX] no drop and priority flow control [PFC]) | |
| Layer 3 Features | ● Layer 3 interfaces: Routed ports, switch virtual interface (SVI), port channels, subinterfaces, and port-channel subinterfaces |
| ● Support for up to 32,000 IPv4 and 8000 IPv6 host prefixes | |
| ● Support for up to 8000 multicast routes (IPv4) | |
| ● Support for up to 8000 IGMP snooping groups | |
| ● Support for 4000 Virtual Routing and Forwarding (VRF) entries | |
| ● Support for up to 4096 VLANs | |
| ● Equal-Cost Multipathing (ECMP) up to 64 ways | |
| ● 4000 flexible ACL entries | |
| ● Routing protocols: Static, Routing Information Protocol Version 2 (RIPv2), Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First Version 2 (OSPFv2), Border Gateway Protocol (BGP), and Intermediate System-to-Intermediate System (IS-IS) | |
| ● IPv6 routing protocols: Static, OPFv3, BGPv6, and EIGRPv6 | |
| ● IPv6 VRF-lite | |
| ● BFD support: OSPFv2, BGPv4, EIGRP, and VRF instances | |
| ● Policy-Based Routing (IPv4 and IPv6) | |
| ● Hot-Standby Router Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) | |
| ● IP direct broadcast | |
| ● vPC+ routing protocol peering | |
| ● ACL: Routed ACL with Layer 3 and 4 options to match ingress and egress ACL | |
| ● Multicast: Protocol Independent Multicast Version 2 (PIMv2) sparse mode, Source-Specific Multicast (SSM), Bidir-PIM, Multicast Source Discovery Protocol (MSDP), IGMPv2 and v3, and Multicast VLAN Registration (MVR) | |
| ● VRF: VRF-lite (IP VPN); VRF-aware unicast; and BGP-, OSPF-, RIP-, and VRF-aware multicast | |
| ● Unicast Reverse-Path Forwarding (uRFP) with ACL; strict and loose modes | |
| ● Jumbo frame support (up to 9216 bytes) | |
| ● Support for up to 24 fabric extenders on each Cisco Nexus 5600 10-Gbps platform switch | |
| Quality of Service (QoS) | ● Layer 2 IEEE 802.1p (class of service [CoS]) |
| ● 8 unicast queues and 8 multicast queues per port | |
| ● Per-port QoS configuration | |
| ● CoS trust | |
| ● Port-based CoS assignment | |
| ● Modular QoS CLI (MQC) compliance: IPv4 and IPv6 | |
| ● ACL-based QoS classification (Layers 2, 3, and 4) | |
| ● Flexible TCAM carving | |
| ● MAC and ARP hardware carving | |
| ● MQC CoS marking | |
| ● Per-port virtual output queuing | |
| ● CoS-based egress queuing | |
| ● Egress strict-priority queuing | |
| ● Egress port-based scheduling: Deficit Weighted Round-Robin (DWRR) | |
| ● Control-Plane Policing (CoPP): IPv4 and IPv6 | |
| Security | ● Ingress ACLs (standard and extended) on Ethernet and virtual Ethernet ports |
| ● Standard and extended Layer 2 ACLs: MAC addresses, protocol type, etc. | |
| ● Standard and extended Layer 3 and 4 ACLs: IPv4 and IPv6, Internet Control Message Protocol (ICMP and ICMPv6), TCP, User Datagram Protocol (UDP), etc. | |
| ● Ingress policing | |
| ● VLAN-based ACLs (VACLs) | |
| ● Port-based ACLs (PACLs) | |
| ● Named ACLs | |
| ● Optimized ACL distribution | |
| ● ACLs on virtual terminals (vtys) | |
| ● ACL logging (IPv4 only) | |
| ● Dynamic Host Configuration Protocol (DHCP) snooping with Option 82 | |
| ● Dynamic ARP Inspection | |
| ● IP source guard | |
| ● DHCP relay (up to 32 destinations) | |
| ● Ethernet port security | |
| ● IPv6 RACL, PACL, and VACL | |
| ● iSCSI type-length-value (TLV) | |
| High-Availability Features | ● Cisco In-Service Software Upgrade (ISSU) for Layer 2 |
| ● Hot-swappable field-replaceable power supplies and fan modules | |
| ● N+1 and N+N power redundancy | |
| ● N+1 fan module redundancy | |
| Management | ● Switch management using 10/100/1000-Mbps management or console ports |
| ● CLI-based console to provide detailed out-of-band management | |
| ● In-band switch management | |
| ● Port-based locator and beacon LEDs | |
| ● Configuration synchronization | |
| ● Configuration rollback | |
| ● Secure Shell Version 2 (SSHv2) | |
| ● Telnet | |
| ● Authentication, authorization, and accounting (AAA) | |
| ● AAA with RBAC | |
| ● RADIUS | |
| ● TACACS+ | |
| ● Syslog (8 servers) | |
| ● Embedded packet analyzer | |
| ● SNMPv1, v2, and v3 (IPv4 and IPv6) | |
| ● Enhanced SNMP MIB support | |
| ● XML (NETCONF) support | |
| ● Remote monitoring (RMON) | |
| ● Advanced Encryption Standard (AES) for management traffic | |
| ● Unified username and passwords across CLI and SNMP | |
| ● Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) | |
| ● Digital certificates for management between switch and RADIUS server | |
| ● Cisco Discovery Protocol Versions 1 and 2 | |
| ● RBAC | |
| ● SPAN on physical, PortChannel and VLAN | |
| ● ERSPAN | |
| ● Ingress and egress packet counters per interface | |
| ● Network Time Protocol (NTP) | |
| ● Cisco Generic Online Diagnostics (GOLD) | |
| ● Comprehensive bootup diagnostic tests | |
| ● Cisco Embedded Event Manager (EEM) | |
| ● Cisco Call Home | |
| ● Cisco Smart Call Home | |
| ● Default Interface | |
| ● Cisco Fabric Manager | |
| ● Cisco Prime DCNM | |
| ● CiscoWorks LAN Management Solution (LMS) | |
| Data Center Bridging | ● CEE- and IEEE-compliant PFC (per-priority Pause frame support: IEEE 802.1Qbb) |
| ● PFC link distance support: 20 km | |
| ● CEE-compliant DCBX Protocol | |
| ● CEE- and IEEE-compliant enhanced transmission selection | |
| FCoE Features (Require Storage Services License) | ● T11 standards-compliant FCoE (Fibre Channel-BB-5) |
| ● T11 FCoE Initialization Protocol (FIP) (Fibre Channel-BB-5) | |
| ● Any 10 or 40 Gigabit Ethernet port configurable as FCoE | |
| ● SAN administration separate from LAN administration | |
| ● Fibre Channel forwarding (FCF) | |
| ● Fibre Channel enhanced port types: VE, VF and VNP | |
| ● Direct attachment of FCoE targets | |
| ● Fabric Device Management Interface (FDMI) | |
| ● Fibre Channel ID (FCID) persistence | |
| ● Distributed device alias services | |
| ● In-order delivery | |
| ● Port tracking | |
| ● Cisco FCoE NPV technology | |
| ● N-port identifier virtualization (NPIV) | |
| ● Fabric services: Name server, registered state change notification (RSCN), login services, and name-server zoning | |
| ● Per-VSAN fabric services | |
| ● Cisco Fabric Services | |
| ● Distributed device alias services | |
| ● Host-to-switch and switch-to-switch Fibre Channel-SP authentication | |
| ● Fabric Shortest Path First (FSPF) | |
| ● Standard zoning | |
| ● Enhanced zoning | |
| ● Cisco Fabric Analyzer | |
| ● Cisco DCNM-SAN | |
| ● Storage Management Initiative Specification (SMI-S) | |
| ● Boot from SAN over vPC and Enhanced vPC (EvPC) | |
| ● FCP | |
| ● VSAN trunking | |
| ● Fabric Device Management Interface (FDMI) | |
| ● Fibre Channel ID (FCID) persistence | |
| ● Distributed device alias services | |
| ● In-order delivery | |
| ● Port tracking | |
| ● Cisco NPV technology | |
| ● Fabric binding for Fibre Channel | |
| ● Port security | |
| ● Fibre Channel traceroute | |
| ● Fibre Channel ping | |
| ● Fibre Channel debugging | |
| SNMP MIBs | |
| Generic MIBs | ● SNMPv2-SMI |
| ● CISCO-SMI | |
| ● SNMPv2-TM | |
| ● SNMPv2-TC | |
| ● IANA-ADDRESS-FAMILY-NUMBERS-MIB | |
| ● IANAifType-MIB | |
| ● IANAiprouteprotocol-MIB | |
| ● HCNUM-TC | |
| ● CISCO-TC | |
| ● SNMPv2-MIB | |
| ● SNMP-COMMUNITY-MIB | |
| ● SNMP-FRAMEWORK-MIB | |
| ● SNMP-NOTIFICATION-MIB | |
| ● SNMP-TARGET-MIB | |
| ● SNMP-USER-BASED-SM-MIB | |
| ● SNMP-VIEW-BASED-ACM-MIB | |
| ● CISCO-SNMP-VACM-EXT-MIB | |
| Layer 3 MIBs | ● UDP-MIB |
| ● TCP-MIB | |
| ● OSPF-MIB | |
| ● BGP4-MIB | |
| ● CISCO-HSRP-MIB | |
| Ethernet MIBs | ● CISCO-VLAN-MEMBERSHIP-MIB |
| ● CISCO-Virtual-Interface-MIB | |
| ● CISCO-VTP-MIB | |
| Configuration MIBs | ● ENTITY-MIB |
| ● IF-MIB | |
| ● CISCO-ENTITY-EXT-MIB | |
| ● CISCO-ENTITY-FRU-CONTROL-MIB | |
| ● CISCO-ENTITY-SENSOR-MIB | |
| ● CISCO-FLASH-MIB | |
| ● CISCO-SYSTEM-MIB | |
| ● CISCO-SYSTEM-EXT-MIB | |
| ● CISCO-IP-IF-MIB | |
| ● CISCO-IF-EXTENSION-MIB | |
| ● CISCO-SERVER-INTERFACE-MIB | |
| ● CISCO-NTP-MIB | |
| ● CISCO-IMAGE-MIB | |
| ● CISCO-IMAGE-CHECK-MIB | |
| ● CISCO-IMAGE-UPGRADE-MIB | |
| ● CISCO-CONFIG-COPY-MIB | |
| ● CISCO-ENTITY-VENDORTYPE-OID-MIB | |
| ● CISCO-BRIDGE-MIB | |
| Monitoring MIBs | ● DIFFSERV-DSCP-TC |
| ● NOTIFICATION-LOG-MIB | |
| ● DIFFSERV-MIB | |
| ● CISCO-CALLHOME-MIB | |
| ● CISCO-SYSLOG-EXT-MIB | |
| ● CISCO-PROCESS-MIB | |
| ● RMON-MIB | |
| ● CISCO-RMON-CONFIG-MIB | |
| ● CISCO-HC-ALARM-MIB | |
| ● LLDP-MIB | |
| Security MIBs | ● CISCO-AAA-SERVER-MIB |
| ● CISCO-AAA-SERVER-EXT-MIB | |
| ● CISCO-COMMON-ROLES-MIB | |
| ● CISCO-COMMON-MGMT-MIB | |
| ● CISCO-RADIUS-MIB | |
| ● CISCO-SECURE-SHELL-MIB | |
| ● TCP/IP MIBs | |
| ● INET-ADDRESS-MIB | |
| ● TCP-MIB | |
| ● CISCO-TCP-MIB | |
| ● UDP-MIB | |
| ● IP-MIB | |
| ● CISCO-IP-PROTOCOL-FILTER-MIB | |
| ● CISCO-DNS-CLIENT-MIB | |
| ● CISCO-PORTSECURITY-MIB | |
| Miscellaneous MIBs | ● START-MIB |
| ● CISCO-LICENSE-MGR-MIB | |
| ● CISCO-FEATURE-CONTROL-MIB | |
| ● CISCO-CDP-MIB | |
| ● CISCO-RF-MIB | |
| ● CISCO-ETHERNET-FABRIC-EXTENDER-MIB | |
| ● CISCO-BRIDGE-MIB | |
| ● CISCO-FCOE-MIB | |
| ● CISCO-PORTCHANNEL-MIB | |
| ● CISCO-ZS-MIB | |
Packing Information
Cisco Nexus 5000 Series N5K-C5672UP-16G is sealed in cisco original box. We will also pack N5K-C5672UP-16G with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Shipping Methods
2-4 business days
2-4 business days
2-4 business days
5-7 business days
Payment Method
T/T,Western Union, HSBC and Money Gram will be accepted.Faster payment will help you to get the items earlier.
Reviews
There are no reviews yet.