The Cisco Firepower 4100 Series is a family of four threat-focused NGFW security platforms. Their throughput range addresses data center and internet edge use cases. They deliver superior threat defense, at faster speeds, with a smaller footprint. Cisco Firepower 4100 Series supports flow-offloading, programmatic orchestration, and the management of security services with RESTful APIs. FPR4140-NGFW-K9 stands for Cisco Firepower 4140 NGFW Appliance. 1U. 2 x NetMod Bays.
Specification
FPR4140-NGFW-K9 | ||
---|---|---|
Product Number | FPR4140-NGFW-K9 | |
Product Description | Cisco Firepower 4140 NGFW Appliance. 1U. 2 x NetMod Bays | |
Cisco Firepower 4140 Specification | ||
Performance and Capabilities on Firepower Appliances | ||
Stateful inspection firewall throughput | 70 Gbps | |
Stateful inspection firewall throughput (multiprotocol) | 40 Gbps | |
Concurrent firewall connections | 25 million | |
Firewall latency (UDP 64B microseconds) | 3.5 | |
New connections per second | 350,000 | |
IPsec VPN throughput (450B UDP L2L test) | 14 Gbps | |
IPsec/Cisco AnyConnect/Apex site-to-site VPN peers | 20,000 | |
Maximum number of VLANs | 1024 | |
Security contexts (included; maximum) | 10; 250 | |
High availability | Active/active and active/standby | |
Clustering | Up to 16 appliances | |
Scalability | VPN Load Balancing, Firewall Clustering | |
Centralized management | Centralized configuration, logging, monitoring, and reporting are performed by Cisco Security Manager or alternatively in the cloud with Cisco Defense Orchestrator | |
Adaptive Security Device Manager | Web-based, local management for small-scale deployments | |
Hardware Specifications | ||
Dimensions (H x W x D) | 1.75 x 16.89 x 29.7 in. (4.4 x 42.9 x 75.4 cm) | |
Form factor (rack units) | 1RU | |
Security module slots | – | |
I/O module slots | 2 | |
Supervisor | Cisco Firepower 4000 Supervisor with 8 x 10 Gigabit Ethernet ports and 2 Network Module (NM) slots for I/O expansion | |
Network modules | ● 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network modules ● 4 x 40 Gigabit Ethernet Quad SFP+ network modules ● 8-port 1Gbps copper, FTW (fail to wire) Network Module Note: Firepower 4100 Series appliances may also be deployed as dedicated threat sensors, with fail-to-wire network modules. Please contact your Cisco representative for details. |
|
Maximum number of interfaces | Up to 24 x 10 Gigabit Ethernet (SFP+) interfaces; up to 8 x 40 Gigabit Ethernet (QSFP+) interfaces with 2 network modules | |
Integrated network management ports | 1 x Gigabit Ethernet copper port | |
Serial port | 1 x RJ-45 console | |
USB | 1 x USB 2.0 | |
Storage | 400 GB | |
Power supplies | Configuration | Dual 1100W AC |
AC input voltage | 100 to 240V AC | |
AC maximum input current | 13A | |
AC maximum output power | 1100W | |
AC frequency | 50 to 60 Hz | |
AC efficiency | >92% at 50% load | |
DC input voltage | -40V to -60VDC | |
DC maximum input current | 27A | |
DC maximum output power | 950W | |
DC efficiency | >92.5% at 50% load | |
Redundancy | 1+1 | |
Fans | 6 hot-swappable fans | |
Noise | 78 dBA | |
Rack mountable | Yes, mount rails included (4-post EIA-310-D rack) | |
Weight | 36 lb (16 kg): 2 x power supplies, 2 x NMs, 6x fans; 30 lb (13.6 kg): no power supplies, no NMs, no fans | |
Temperature: operating | 32 to 95°F (0 to 35°C), at sea level | |
Temperature: nonoperating | -40 to 149°F (-40 to 65°C) | |
Humidity: operating | 5 to 95% noncondensing | |
Humidity: nonoperating | 5 to 95% noncondensing | |
Altitude: operating | 10,000 ft (max) | |
Altitude: nonoperating | 40,000 ft (max) |
Packing Information
Cisco Firepower 4100 Series Appliances FPR4140-NGFW-K9 is sealed in cisco original box. We will also pack FFPR4140-NGFW-K9 with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Reviews
There are no reviews yet.