Cisco 3850 Series Power Supply – PWR-C1-715WAC 715W AC Config 1 Power Supply for 3850 Series.
|Power supply rated maximum||715W|
|Total output BTU (Note: 1000 BTU/hr = 293W)||2465 BTU/hr, 715W|
|Input-voltage range and frequency||100-240VAC,|
|Output ratings||-56V at 12.8A|
|Output holdup time||16.7 ms minimum at 100VAC|
|Power-supply input receptacles||IEC 320-C16|
|Power cord rating||13A|
|Physical specifications||(H x W x D): 1.58 X 3.25 X 12.20 in|
Weight: 2.8 lb
|Operating temperature||23 to 113°F (-5 to 45°C)|
|Storage temperature||-40 to 158°F (-40 to 70°C)|
|Relative humidity operating and nonoperating noncondensing||5 to 90% noncondensing|
|Altitude||10,000 ft. (3000 meters), up to 45°C|
|MTBF||Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3. Demonstrated MTBF is 500,000 hr (with 90% confidence level).|
|EMI and EMC compliance||FCC Part 15 (CFR 47) Class A|
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
BSMI Class A (AC input models only)
VCCI Class A
EN 55024, EN300386, EN 50082-1, EN 61000-3-2, EN 61000-3-3
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN 61000-6-1
|Safety compliance||UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking|
|LED indicators||“AC OK”: Input power to the power supply is OK|
“PS OK”: Output power from the power supply is OK
Cisco 3850 Series Power Supply PWR-C1-715WAC= is sealed in cisco original box. We will also pack PWR-C1-715WAC= with second box before shipping.
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
There are no reviews yet.