This product is Cisco ASR 1013 Chassis, Dual P/S. Before the router operates, necessary components must be installed.
The Cisco ASR 1013 Router supports full-width card modules. It is designed with a single midplane with connectors on one interface midplane. The Cisco ASR 1013 Router supports:
· Up to 6 ASR1000-SIP40G shared port adapter modules
· Up to 24 shared port adapters (SPAs) and up to six SIPs
· Two embedded services processors
· Cisco ASR1000-RP2 route processor
· Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies and two power supply zones
Specification
| Quick Specs | |
|---|---|
| Models | ASR1013 |
| Scalability | 40 to 200 Gbps |
| Targeted for | Large enterprise Internet edge, service provider |
| Rack Height | 13U |
| Shared port adapters | 24 |
| Ethernet port adapters | 12 |
| Embedded services processor slots | 2 |
| Route processor slots | 2 |
| Number of SPA interface processors (SIPs) supported | 6 |
| Redundancy | Yes: Hardware |
| Dimension (H x W x D) | 579.1 x 437.4 x 461.0 mm |
| Specification | |
| Physical specifications | Height: 22.8 in. (579.1 mm) |
| Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. | Width: 17.2 in. (437.4 mm) |
| Refer to the applicable hardware installation guide for additional details. | Depth: 18.15 in. (461.0 mm) |
| Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details. |
● 184.0 lb (83.46 kg) (with redundant AC power supply, SPA, route processor, SIP blank covers, two Cisco ASR 1000 Series 40-Gbps ESPs [ASR1000-ESP40] or ASR1000 Series 100-Gbps ESPs [ASR1000-ESP100] or ASR1000 Series 200-Gbps ESPs [ASR1000-ESP200], two Cisco ASR 1000 Series RP2s [ASR1000-RP2], six Cisco ASR 1000 Series 40-Gbps SIPs [ASR1000-SIP40], and no SPAs) |
| Default memory | 8-GB DRAM RP2 |
| 8-GB DRAM RP3 | |
| Number of SIPs or Ethernet line cards supported | 6 |
| Shared port adapters | 24 SPA slots |
| Ethernet port adapters | 12 EPA slots |
| Cisco ASR 1000 Series ESP | 2 ESP slots |
| Route processor | 2 route-processor slots |
| Redundancy | Hardware: Yes |
| Built-in Gigabit Ethernet ports | 0 |
| Built-in 10 Gigabit Ethernet port | No |
| Network interface module | No |
| Cisco ASR 1000 Series | Cisco ASR 1013 |
| ESP support | Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40), |
| Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100), and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) | |
| ESP bandwidth | 40 to 200 Gbps |
| ESP memory | Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40): |
| 8-GB DRAM | |
| Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM | |
| Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200): 32-GB DRAM | |
| SIPs and Ethernet line cards | Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE (ASR1000-2T+20X1GE) line cards; and six 10 GE line cards (ASR1000-6TGE) |
| Embedded hardware-based encryption | Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput, Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput, and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) with up to 78-Gbps crypto support throughput |
| Minimum Cisco IOS XE Software release | Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) requires Cisco IOS XE Software Release 3.1.0S, ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) requires Cisco IOS XE Software Release 3.7.0S, and ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) requires Cisco IOS XE Software Release 3.10.0S |
| Rack-mounting | Yes: 19-inch |
| Wall-mounting | No |
| External USB flash memory | 1-GB USB flash-memory support |
| Redundant power supply | Yes: Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies |
| Note: A mix of AC and DC power supplies is not supported. | |
| Power input | Worldwide ranging AC (180 to 264V; 240V; 60 or 50 Hz nominal) |
| Worldwide ranging DC | |
| (-40.5 to | |
| -72; -48V nominal) | |
| Power consumption | ● Maximum (DC): 4200W |
| ● Maximum (AC-high line): 4000W | |
| ● Maximum (out): 3390W | |
| Airflow | Front-to-back |
| Operating temperature (nominal) | Same as for Cisco ASR 1001-X |
| Operating temperature (short-term) | Same as for Cisco ASR 1001-X |
| Operating humidity (nominal) (relative humidity) | Same as for Cisco ASR 1001-X |
| Operating humidity (short-term) | Same as for Cisco ASR 1002 |
| Storage temperature | Same as for Cisco ASR 1001-X |
| Storage humidity (relative humidity) | Same as for Cisco ASR 1001-X |
| Operating altitude | Same as for Cisco ASR 1001-X |
| Network Equipment Building Standards (NEBS) | GR-1089 and GR-63 |
| EMC standards | Same as for Cisco ASR 1001-X |
Packing Information
Cisco ASR 1000 Series Router ASR1013 is sealed in cisco original box. We will also pack ASR1013 with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Shipping Methods
2-4 business days
2-4 business days
2-4 business days
5-7 business days
Payment Method
T/T,Western Union, HSBC and Money Gram will be accepted.Faster payment will help you to get the items earlier.
Reviews
There are no reviews yet.