FPR4140-NGFW-K9 Cisco Firepower 4100 Seriengeräte

FPR4140-NGFW-K9- Cisco Firepower 4100 Series NGFW Appliance. 1U. 2 x NetMod Bays

Produktspezifikation:

Herkunftsort : USA

Markenname : CISCO

Zertifizierung : FCC

Modell-Nr : FPR4140-NGFW-K9

Mindestbestellmenge : 1/Einheit

Lieferzeit : 3 Tage

Anfrage absenden

Beschreibung
Bewertungen (0)

Die Cisco Firepower 4100 Series is a family of four threat-focused NGFW security platforms. Their throughput range addresses data center and internet edge use cases. They deliver superior threat defense, at faster speeds, with a smaller footprint. Cisco Firepower 4100 Series supports flow-offloading, programmatic orchestration, and the management of security services with RESTful APIs. FPR4140-NGFW-K9 stands for Cisco Firepower 4140 NGFW-Appliance. 1U. 2 x NetMod Bays.

Spezifikation

FPR4140-NGFW-K9
Produktnummer		FPR4140-NGFW-K9
Produktbeschreibung		Cisco Firepower 4140 NGFW-Appliance. 1U. 2 x NetMod Bays
Cisco Firepower 4140 Spezifikation
Performance and Capabilities on Firepower Appliances
Stateful inspection firewall throughput		70 Gbit/s
Stateful inspection firewall throughput (Multiprotokoll)		40 Gbit/s
Concurrent firewall connections		25 million
Firewall latency (UDP 64B microseconds)		3.5
New connections per second		350,000
IPsec VPN throughput (450B UDP L2L test)		14 Gbit/s
IPsec/Cisco AnyConnect/Apex site-to-site VPN peers		20,000
Maximale Anzahl von VLANs		1024
Security contexts (included; maximal)		10; 250
High availability		Active/active and active/standby
Clustering		Bis zu 16 appliances
Skalierbarkeit		VPN Load Balancing, Firewall Clustering
Centralized management		Centralized configuration, logging, Überwachung, and reporting are performed by Cisco Security Manager or alternatively in the cloud with Cisco Defense Orchestrator
Adaptive Security Device Manager		Webbasiert, local management for small-scale deployments
Hardware-Spezifikationen
Maße (H x B x T)		1.75 X 16.89 X 29.7 In. (4.4 X 42.9 X 75.4 cm)
Formfaktor (Rack-Einheiten)		1RU
Security module slots		–
I/O-Modulsteckplätze		2
Aufsicht		Cisco Firepower 4000 Supervisor with 8 X 10 Gigabit-Ethernet-Ports und 2 Netzwerkmodul (NM) slots for I/O expansion
Netzwerkmodule		● 8 X 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network modules ● 4 X 40 Gigabit Ethernet Quad SFP+ network modules ● 8-port 1Gbps copper, FTW (fail to wire) Netzwerkmodul Notiz: Firepower 4100 Series appliances may also be deployed as dedicated threat sensors, with fail-to-wire network modules. Please contact your Cisco representative for details.
Maximale Anzahl an Schnittstellen		Bis zu 24 X 10 Gigabit Ethernet (SFP+) Schnittstellen; bis zu 8 X 40 Gigabit Ethernet (QSFP+) interfaces with 2 network modules
Integrierte Netzwerkverwaltungsports		1 x Gigabit Ethernet copper port
Serielle Schnittstelle		1 x RJ-45-Konsole
USB		1 x USB 2.0
Lagerung		400 GB
Netzteile	Aufbau	Dual 1100W AC
	AC-Eingangsspannung	100 bis 240V AC
	Maximaler AC-Eingangsstrom	13A
	Maximale AC-Ausgangsleistung	1100W
	Wechselstromfrequenz	50 Zu 60 Hz
	AC-Effizienz	>92% bei 50% Belastung
	DC input voltage	-40V to -60VDC
	DC maximum input current	27A
	DC maximum output power	950W
	DC efficiency	>92.5% bei 50% Belastung
	Redundanz	1+1
Fans		6 hot-swappable fans
Lärm		78 dBA
Rackmontierbar		Ja, mount rails included (4-Post EIA-310-D-Rack)
Gewicht		36 Pfund (16 kg): 2 x power supplies, 2 x NMs, 6x fans; 30 Pfund (13.6 kg): no power supplies, no NMs, no fans
Temperatur: Betriebs		32 to 95°F (0 to 35°C), at sea level
Temperatur: außer Betrieb		-40 bis 149°F (-40 bis 65°C)
Feuchtigkeit: Betriebs		5 Zu 95% nicht kondensierend
Feuchtigkeit: außer Betrieb		5 Zu 95% nicht kondensierend
Höhe: Betriebs		10,000 ft (max)
Höhe: außer Betrieb		40,000 ft (max)

Verpackungsinformationen

Cisco Firepower 4100 Series Appliances FPR4140-NGFW-K9 is sealed in cisco original box. We will also pack FFPR4140-NGFW-K9 with the second box before shipping.