This power adapter is an OV (overvoltage) category II device per the NEC. For proper installation and requirements for branch circuit protection, isolation and surge protection when connected to an OV (overvoltage) category III or IV power source, please refer to national and local codes (Par exemple, in the USA: NFPA 70, National Electric Code, and in Canada: Canadian Electrical Code)
All parameters listed in the following table are specified at 230VAC input, rated load, 25°C 70% RH ambient.
spécification
Sortir | DC Voltage | 48V |
---|---|---|
Rated Current | 1.25UN | |
Current Range | 0 ~ 1.25A | |
Rated Power (Max.) | 60O | |
Ripple and Noise (Max.) | 240mVp-p 380mVp-p for Japan version only |
|
Voltage Tolerance | ±3.5% | |
Line Regulation | ±1.0% | |
Load Regulation | ±2.5% | |
Setup, Rise Time | 600MS, 30MS / 230VCA 600MS, 30MS / 115VAC at full load |
|
Hold Up Time (Typ.) | 50MS / 230VCA 15MS / 115VAC at full load |
|
Saisir | Voltage Range | 100 ~ 264VAC 90 ~ 264VAC for Japan version only |
Frequency Range | 47 ~ 63Hz | |
Efficacité (Typ.) | 92% | |
AC Current | 1.4UN / 115VCA 1UN / 230VCA |
|
Inrush Current (Max.) | 65UN / 230VCA | |
Leakage Current (Max.) | 0.75mA / 240VCA | |
Protection | Overload | 105 ~ 150% rated output power Protection type—Hiccup mode, recovers automatically after fault condition is removed |
Over Voltage | 50.4 ~ 64.8V Protection type—Shut down o/p voltage, re-power on to recover |
|
Over Temperature | RTH2 > 70°C Protection type—Shut down o/p voltage, re-power on to recover |
|
Environnement | Working Temp. | -30 ~ + 60°C (Refer to output load derating curve) |
Working Humidity | 0% – 100% RH condensing | |
Intrusion Protection | IP67 | |
Storage Temp. | -30 ~ +85°C | |
Temp. Coefficient | ± 0.03% / °C (0 ~ 50°C) | |
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Oui, Z axes | |
UV Rating (câble) | per ASTM G155-05 Cycle 1 | |
Sécurité et CEM | Safety Standards | UL/cUL60950-1, TUV EN60950-1, CCC GB4943, S-mark (Argentina), EAC (Russie), NOM (Mexico), SAA (Australie), KC (Corée), BMSI (Taïwan) PSE (Japon) for AIR-PWRADPT2-1530= only |
Withstand Voltage | I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC | |
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VCC / 25°C/ 70% RH | |
EMI Conduction and Radiation | EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254 class B | |
Harmonic Current | Compliance to EN61000-3-2,3, GB17625.1 | |
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A |
Informations d'emballage
Cisco Aironet 1530 Series Power Adapters AIR-PWRADPT-1530= is sealed in cisco original box. We will also pack AIR-PWRADPT-1530= with the second box before shipping.
Expédition
Nos produits seront envoyés via FedEx,DHL,TNT,UPS,SME,Et ainsi de suite. Mais l'acheteur est responsable de
Dédouanement et tarif de paiement lorsque le produit est arrivé dans le pays de destination.
Avis
Il n’y a pas encore d’avis.