Nport 5600 Serie
8 and 16-port RS-232/422/485 rackmount serial device servers
With the NPort® 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 16 Serial Devices
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
19-Inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, y 8 o 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for a standard 19-inch rackmount, allowing you to simplify operational, mantenimiento, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.
| NPort 5610-16-48V | NPort 5610-16-48V | Nport 5650-8 | Nport 5630-8 | Nport 5630-16 |
| NPort 5650-16-M-SC | NPort 5650-16-M-SC | NPort 5650-16-T | NPort 5650-8-HV-T | NPort 5650-16-S-SC |
| NPort 5650-8-M-SC | NPort 5650-8-M-SC | Nport 5610-8 | Nport 5610-16 | NPort 5610-8-48V |
| NPort 5650-16-HV-T | NPort 5650-16-HV-T | NPort 5650-8-S-SC | Nport 5650-16 | NPort 5650-8-T |
Especificación
Ethernet Interface
| 10/100BaseT(X) Puertos (RJ45 connector) | 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Magnetic Isolation Protection | 1.5 kV (built-in) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fibra óptica |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ethernet Software Features
| Configuration Options | Telnet Console Web Console (HTTP/HTTPS) Windows Utility |
| Gestión | ARP BOOTP DHCP Client DNS HTTP HTTPS ICMP IPv4 LLDP RFC2217 Rtelnet APP SLIP SMTP SNMPv1/v2c TCP/IP Telnet UDP |
| Filtrar | IGMP v1/v2c |
| Windows Real COM Drivers | Windows 11/10/8.1/8/7/Vista/XP/ME/98/95 Windows Server 2022/2019/2016/2012 R2/2012/2008 R2/2008/2003 Windows Embedded CE 6.0/5.0, Windows XP Embedded |
| Linux Real TTY Drivers | Kernel versions 6.x, 5.X, 4.X, 3.X, 2.6.X, and 2.4.x |
| Fixed TTY Drivers | macOS Versions: 11.X, 10.12 a 10.15 |
| Arm®-based Platform Support | Linux Kernel 5.x/4.x |
| VMWare ESXi (Windows 11/10 | VMWare ESXi (Windows 11/10) VMware Fusion (Windows on macOS 10.12 to 11.x) Parallels Desktop (Windows on macOS 10.12 to 11.x) |
| Android API | Android 3.1.x and later |
| Time Management | SNTP |
Security Functions
| Autenticación | Local database |
| Cifrado | HTTPS AES-128 RSA-1024 SHA-1 SHA-256 |
| Security Protocols | HTTPS (TLS 1.2) SNMPv3 |
Serial Interface
| Conector | 8-pin RJ45 |
| No. of Ports | 8 o 16 puertos |
| Serial Standards | Nport 5610 Modelos: RS-232 Nport 5630 Modelos: RS-422, RS-485 Nport 5650 Modelos: RS-232, RS-422, RS-485 |
| Operation Modes | Disabled Ethernet Modem Pair Connection Real COM Reverse Telnet RFC2217 TCP Client TCP Server UDP |
| Baudrate | Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800,2400, 4800,7200,9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Paridad | Ninguno, Even, Odd, Space, Mark |
| Flow Control | Ninguno RTS/CTS (RS-232 only) DTR/DSR (RS-232 only) XON/XOFF |
| Pull High/Low Resistor for RS-485 | 1 kilo-ohm, 150 kilo-ohms |
| Terminator for RS-485 | 120 ohms |
| RS-485 Data Direction Control | Automatic Data Direction Control (ADDC) |
Serial Signals
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters
| Corriente de entrada | NPort 5610-8-48V/16-48V: 135 mA @ 48 VCC NPort 5650-8-HV-T/16-HV-T: 152 mA @ 88 VCC Nport 5610-8/16: 141 mA @ 100 VACACIONES Nport 5630-8/16: 152 mA @ 100 VACACIONES NPort 5650-8/8-T/16/16-T: 158 mA @ 100 VACACIONES NPort 5650-8-M-SC/16-M-SC: 174 mA @ 100 VACACIONES NPort 5650-8-S-SC/16-S-SC: 164 mA @ 100 VACACIONES |
| Voltaje de entrada | HV Models: 88 a 300 VCC AC Models: 100 a 240 VACACIONES, 47 a 63 Hz DC Models: ±48 VDC, 20 a 72 VCC, -20 a -72 VCC |
Fiabilidad
| Automatic Reboot Trigger | Built-in WDT |
Características físicas
| Alojamiento | Metal |
| Installation | 19-inch rack mounting |
| Dimensiones (with ears) | 480 X 45 X 198 milímetro (18.90 X 1.77 X 7.80 en) |
| Dimensiones (without ears) | 440 X 45 X 198 milímetro (17.32 X 1.77 X 7.80 en) |
| Peso | NPort 5650-16-HV-T: 3,820 gramo (8.42 libras) NPort 5650-8-HV-T: 3,720 gramo (8.20 libras) NPort 5610-16-48V: 3,260 gramo (7.19 libras) NPort 5610-8-48V: 3,160 gramo (6.97 libras) Nport 5630-16: 2,560 gramo (5.64 libras) NPort 5630-8/5650-16/5650-16-T: 2,510 gramo (5.53 libras) NPort 5650-16-S-SC: 2,500 gramo (5.51 libras) Nport 5610-16: 2,490 gramo (5.49 libras) NPort 5650-8-S-SC/5650-16-M-SC: 2,440 gramo (5.38 libras) Nport 5610-8: 2,290 gramo (5.05 libras) NPort 5650-8-M-SC: 2,380 gramo (5.25 libras) NPort 5650-8/5650-8-T: 2,310 gramo (5.09 libras) |
| Interactive Interface | LCD panel display (standard temp. models only) Push buttons for configuration (standard temp. models only) |
Environmental Limits
| Temperatura de funcionamiento | Standard Models: 0 a 60°C (32 a 140°F) Wide Temp. Modelos: -40 to 75°C (-40 to 167°F) High-voltage Wide Temp. Modelos: -40 a 85°C (-40 a 185°F) |
| Temperatura de almacenamiento (package included) | Standard Models: -20 a 70°C (-4 a 158°F) Wide Temp. Modelos: -40 to 75°C (-40 to 167°F) High-voltage Wide Temp. Modelos: -40 a 85°C (-40 a 185°F) |
| Ambient Relative Humidity | 5 a 95% (sin condensación) |
Standards and Certifications
| CEM | EN 55032/35 |
| EMI | CISPR 32, FCC Part 15B Class A |
| ccsme | Nport 5650-8/16 Modelos: CEI 61000-4-2 ESD: Contacto: 8 kV; Air: 15 kV CEI 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m CEI 61000-4-4 EFT: Fuerza: 4 kV; Signal: 2 kV CEI 61000-4-5 Surge: Fuerza: 2.5 kV; Signal: 1 kV CEI 61000-4-6 CS: 150 kHz to 80 megahercio: 3 V/m; Signal: 3 V/m CEI 61000-4-8 CEI 61000-4-11 NPort 5650-8/16-HV Models: CEI 61000-4-2 ESD: Contacto: 4 kV; Air: 8 kV CEI 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m CEI 61000-4-4 EFT: Fuerza: 4 kV; Signal: 2 kV CEI 61000-4-5 Surge: Fuerza: 2 kV CEI 61000-4-6 CS: 150 kHz to 80 megahercio: 3 V/m; Signal: 3 V/m CEI 61000-4-8 |
| Seguridad | UL 62368-1 |
| Medical | EN 55011: 2007+A2: 2007 Clase A (Group 1) obediente EN 60601-1-2: 2007 obediente |
MTBF
| Time | Nport 5610-8: 903,009 hrs NPort 5610-8-48V: 892,692 hrs Nport 5630-8: 844,009 hrs NPort 5650-8-T: 776,469 hrs Nport 5650-8: 754,927 hrs NPort 5650-8-M-SC/8-S-SC: 738,291 hrs NPort 5650-8-HV-T: 716,168 hrs NPort 5610-16-48V: 693,529 hrs Nport 5610-16: 680,154 hrs Nport 5630-16: 618,263 hrs Nport 5650-16: 525,107 hrs NPort 5650-16-T: 533,046 hrs NPort 5650-16-M-SC/16-S-SC: 517,019 hrs NPort 5650-16-HV-T: 506,093 hrs |
| Estándares | HV Models: Telcordia (Bellcore) Standard TR/SR All Other Models: MIL-HDBK-217F |
Garantía
| Warranty Period | 5 años |
| Detalles | See www.moxa.com/warranty |
Package Contents
| Dispositivo | 1 x NPort 5600 Series device server |
| Installation Kit | 1 x rack-mounting kit |
| Cable | 1 x power cord, suitable for your region (AC models) |
| Documentation | 1 x quick installation guide 1 x warranty card |
Información de embalaje
Envío
Nuestros productos serán enviados a través de FedEx,DHL,TNT,UPS,ccsme,y así sucesivamente. Pero el comprador es responsable de
despacho de aduana y tarifa de pago cuando el producto llegó al país de destino.
Métodos de envío
2-4 dias habiles
2-4 dias habiles
2-4 dias habiles
5-7 dias habiles
Método de pago
T/T,Western Union, Se aceptarán HSBC y Money Gram. El pago más rápido lo ayudará a obtener los artículos antes.
Reseñas
Aún no hay reseñas.