El nexo de Cisco® 9000 Series Switches operate in one of two modes – Cisco Application Centric Infrastructure (Cisco ACI™) or Cisco NX-OS. In Cisco ACI mode, these switches provide a turnkey, fully automated, policy-based architecture to design and manage data center fabrics. In Cisco NX-OS mode, these switches provide the capability to use foundational layer 2/3 technologies, as well as modern technologies such as VXLAN, with a Border Gateway Protocol‒Ethernet VPN (BGP-EVPN) control plane, Segment routing, Multiprotocol Label Switching (MPLS), and automation via NX-APIs.
Detalles de producto
El nexo de cisco 9000 Interruptores de serie provides features and benefits:
* High performance
El nexo de Cisco 9500 Series switch delivers nonblocking performance at a latency of 5 microseconds or less at 400-, 100-, 50-, 40-, 25-, 10-, and 1-Gigabit Ethernet speeds. This enables customers to build robust and scalable high-speed fabrics that can support several thousands of high-speed access ports.
* Telemetry
El nexo de Cisco 9500 Series switches support extensive switch and flow telemetry capabilities that provide extensive real-time visibility into switch and fabric states.
* High-density 1-, 10-, 25-, 40- and 50-Gigabit Ethernet access configuration
Organizations can transition from low-speed (100-Megabit Ethernet and 1-Gigabit Ethernet) server access designs to high-speed (1-, 10-, 25-, 40-, and 50-Gigabit Ethernet) server access designs with the same port density.
* High-density 10-, 40-, 100- and 400-Gigabit Ethernet aggregation and spine configuration
El nexo de Cisco 9500 Series Switches help organizations transition from 1- and 10-Gigabit Ethernet infrastructure to 10-, 40-, 100-, and 400-Gigabit Ethernet infrastructures to support the increased bandwidth demands of scale-out, multinode application environments. The compatibility of 400-Gigabit Ehternet QSFP-DD modules, 100-Gigabit Ethernet QSFP28 modules, and 40-Gigabit Ethernet QSFP+ modules enables the migration and coexistence of 40-, 100- and 400-Gigabit Ethernet ports in the fabric.
* Alta disponibilidad, fiabilidad, and scalability
El nexo de Cisco 9500 Series Switches are designed with redundant supervisors, controladores del sistema, fuentes de alimentación, and fan trays, which eliminate any single point of failure in the chassis. These switches also support up to 6 módulos de tela, which provide redundancy and graceful degradation of switching capacity in the event of fabric module failures. All transceivers are pluggable to support the highest possible Mean Time Between Failure (MTBF) for the switch.
* Designed for the future
El nexo de Cisco 9500 Series Switches are designed for future expansion with the capability to support higher speed ports and more bandwidth.
* Power efficiency
El nexo de Cisco 9500 Series Switches are the first switch chassis designed without a midplane. The line cards and fabric modules connect directly. This revolutionary design provides optimal front-to-back airflow and helps the switch operate with less power. Además, all Cisco Nexus 9500 Series switch power supplies are rated at or higher than 80PLUS Platinum for AC inputs and equivalent efficiency for DC inputs.
The typical power consumption per 10-Gigabit Ethernet port is less than 3.5 vatios (W).
The typical power consumption per 40-and 100-Gigabit Ethernet port is less than 14W and 22W respectively.
Especificación
| N9K-C9516 Specification | |
|---|---|
| Chasis | ● Hasta 16 tarjetas de linea ● Hasta 10 fuentes de alimentación ● Hasta 6 fabric modules of the same type ● Hasta 2 controladores del sistema ● Hasta 2 supervisors of the same type ● Hasta 3 bandejas de ventilador |
| Number of line card slots | 16 |
| Físico (alto x ancho x profundidad) | 36.70 X 17.50 X 31.76 en. (93.41 X 44.50 X 80.67 cm) |
| Peso (chasis) | 192 libras (87.3 kg) |
| Temperatura de funcionamiento | 32 a 104°F (0 a 40°C) |
| no operativo (almacenamiento) temperatura | -40 a 158°F (-40 a 70°C) |
| Unidades de rack | 21 |
| Tiempo medio entre fallos (MTBF) Horas | 680,000 |
| Humedad | 5 a 95% (sin condensación) |
| Altitud | 0 a 13,123 pie (0 a 4000m) |
| Cumplimiento normativo | Los productos deben cumplir con las Marcas CE de acuerdo con las directivas 2004/108/EC y 2006/95/EC |
| Seguridad | ● UL 60950-1 Segunda edicion ● CAN/CSA-C22.2 No. 60950-1 Segunda edicion ● EN 60950-1 Segunda edicion ● CEI 60950-1 Segunda edicion ● AS/NZS 60950-1 ● GB4943 |
| CEM: Emisiones | ● Parte 47CFR 15 (CFR 47) Clase A ● AS/NZS CISPR22 Clase A ● CISPR22 Clase A ● EN55022 Clase A ● ICES003 Clase A ● VCCI Clase A ● EN61000-3-2 ●EN61000-3-3 ● KN22 Clase A ● CNS13438 Clase A |
| CEM: Inmunidad | ● EN55024 ● CISPR24 ● EN300386 ● KN 61000-4 serie |
| RoHS | El producto cumple con RoHS-6 con excepciones para el sistema de rejilla de bolas con plomo. (BGA) bolas y conectores de plomo a presión. |
Información de embalaje
nexo de cisco 9500 Series switch N9K-C9516 is sealed in cisco original box. We will also pack N9K-C9516 with the second box before shipping.
Envío
Nuestros productos serán enviados a través de FedEx,DHL,TNT,UPS,ccsme,y así sucesivamente. Pero el comprador es responsable de
despacho de aduana y tarifa de pago cuando el producto llegó al país de destino.
Métodos de envío
2-4 dias habiles
2-4 dias habiles
2-4 dias habiles
5-7 dias habiles
Método de pago
T/T,Western Union, Se aceptarán HSBC y Money Gram. El pago más rápido lo ayudará a obtener los artículos antes.
Reseñas
Aún no hay reseñas.