TCF-142-Serie
RS-232/422/485 to fiber converters
The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) oder bis zu 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.
TCF-142-M-SC |
TCF-142-M-SC-T |
TCF-142-M-ST |
TCF-142-M-ST-T |
TCF-142-S-SC |
TCF-142-S-SC-T |
TCF-142-S-ST |
TCF-142-S-ST-T |
Automatic Baudrate Detection
The TCF-142 converters can automatically detect the serial baudrate, which is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss.
Ring Operation
The TCF-142 converters can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for ring mode. When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km.
Automatic Data Direction Control
Automatic Data Direction Control (ADDC) is a hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC senses and controls RS-485 data direction automatically, making it unnecessary to use the handshaking signal.
Spezifikation
Serial Interface
Baudrate | 50 bps to 921.6 kbit/s (supports non-standard baudrates) | ||||||||||||||||||||||||||||||||||||||||
Flow Control | ADDC (automatic data direction control) for RS-485 | ||||||||||||||||||||||||||||||||||||||||
Glasfaser |
|
||||||||||||||||||||||||||||||||||||||||
Pull High/Low Resistor for RS-485 | 1 kilo-ohm, 150 kilo-ohms | ||||||||||||||||||||||||||||||||||||||||
RS-485 Data Direction Control | ADDC (automatic data direction control) | ||||||||||||||||||||||||||||||||||||||||
Terminator for RS-485 | N / A, 120 ohms, 120 kilo-ohms | ||||||||||||||||||||||||||||||||||||||||
Verbinder | 7-pin terminal block | ||||||||||||||||||||||||||||||||||||||||
NEIN. of Ports | 2 | ||||||||||||||||||||||||||||||||||||||||
Serial Standards | RS-232 RS-422 RS-485 |
||||||||||||||||||||||||||||||||||||||||
Latenz | 300 ns |
Serial Signals
RS-232 | TxD, RxD, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
Potenzparameter
NEIN. of Power Inputs | 1 |
Eingangsstrom | 70 Zu 140 mA @ 12 Zu 48 VDC |
Eingangsspannung | 12 Zu 48 VDC |
Überlastung aktueller Schutz | Unterstützt |
Power Connector | Terminal block |
Energieverbrauch | 70 Zu 140 mA @ 12 Zu 48 VDC |
Umgekehrter Polaritätsschutz | Unterstützt |
Physikalische Eigenschaften
IP -Bewertung | IP30 |
Gehäuse | Metal |
Maße (with ears) | 90 X 100 X 22 mm (3.54 X 3.94 X 0.87 In) |
Maße (without ears) | 67 X 100 X 22 mm (2.64 X 3.94 X 0.87 In) |
Gewicht | 320 G (0.71 Pfund) |
Installation | Wandmontage |
Umweltgrenzen
Betriebstemperatur | Standardmodelle: 0 bis 60°C (32 bis 140°F) Breite Temperatur. Modelle: -40 bis 75 ° C. (-40 bis 167 ° F.) |
Lagertemperatur (Lieferinhalt) | -40 bis 85°C (-40 bis 185°F) |
Umgebungsrelative Luftfeuchtigkeit | 5 Zu 95% (nicht kondensierend) |
Standards und Zertifizierungen
EMV | IN 55032/35 |
EMI | CISPR 32, FCC Teil 15B Klasse A |
EMS | IEC 61000-4-2 ESD: Kontakt: 4 KV; Luft: 8 KV IEC 61000-4-3 Rs: 80 MHz zu 1 GHz: 10 V/m IEC 61000-4-4 Eft: Leistung: 1 KV IEC 61000-4-5 Anstieg: Leistung: 1 KV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 PFMF |
Environmental Testing | IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3 |
Sicherheit | UL 60950-1 |
Vibration | IEC 60068-2-6 |
MTBF
Zeit | 780,480 HRS |
Standards | Telkordien (Bellcore), GB |
Garantie
Garantiefrist | 5 Jahre |
Details | Siehe www.moxa.com/warranty |
Paketinhalt
Gerät | 1 x TCF-142 Series converter |
Installation Kit | 1 x rubber stand |
Dokumentation | 1 x Schnelle Installationshandbuch 1 x Garantiekarte |
Verpackungsinformationen

Sendung
Unsere Produkte werden per FedEx versendet,DHL,TNT,UPS,EMS,und so weiter. aber der käufer ist verantwortlich für
Zollabfertigung und Zahlung des Tarifs, wenn das Produkt im Zielland ankommt.
Versandarten

2-4 Arbeitstage

2-4 Arbeitstage

2-4 Arbeitstage

5-7 Arbeitstage
Bewertungen
Es gibt noch keine Bewertungen.