Der Cisco Nexus® 9000 Series Switches operate in one of two modes – Cisco Application Centric Infrastructure (Cisco ACI™) or Cisco NX-OS. In Cisco ACI mode, these switches provide a turnkey, fully automated, policy-based architecture to design and manage data center fabrics. In Cisco NX-OS mode, these switches provide the capability to use foundational layer 2/3 technologies, as well as modern technologies such as VXLAN, with a Border Gateway Protocol‒Ethernet VPN (BGP-EVPN) control plane, Segment routing, Multiprotocol Label Switching (MPLS), and automation via NX-APIs.
Produktdetails
Der Cisco Nexus 9000 Serienschalter provides features and benefits:
* High performance
Der Cisco Nexus 9500 Series switch delivers nonblocking performance at a latency of 5 microseconds or less at 400-, 100-, 50-, 40-, 25-, 10-, and 1-Gigabit Ethernet speeds. This enables customers to build robust and scalable high-speed fabrics that can support several thousands of high-speed access ports.
* Telemetry
Der Cisco Nexus 9500 Series switches support extensive switch and flow telemetry capabilities that provide extensive real-time visibility into switch and fabric states.
* High-density 1-, 10-, 25-, 40- and 50-Gigabit Ethernet access configuration
Organizations can transition from low-speed (100-Megabit Ethernet and 1-Gigabit Ethernet) server access designs to high-speed (1-, 10-, 25-, 40-, and 50-Gigabit Ethernet) server access designs with the same port density.
* High-density 10-, 40-, 100- and 400-Gigabit Ethernet aggregation and spine configuration
Der Cisco Nexus 9500 Series Switches help organizations transition from 1- and 10-Gigabit Ethernet infrastructure to 10-, 40-, 100-, and 400-Gigabit Ethernet infrastructures to support the increased bandwidth demands of scale-out, multinode application environments. The compatibility of 400-Gigabit Ehternet QSFP-DD modules, 100-Gigabit Ethernet QSFP28 modules, and 40-Gigabit Ethernet QSFP+ modules enables the migration and coexistence of 40-, 100- and 400-Gigabit Ethernet ports in the fabric.
* High availability, reliability, and scalability
Der Cisco Nexus 9500 Series Switches are designed with redundant supervisors, Systemsteuerungen, Netzteile, and fan trays, which eliminate any single point of failure in the chassis. These switches also support up to 6 Stoffmodule, which provide redundancy and graceful degradation of switching capacity in the event of fabric module failures. All transceivers are pluggable to support the highest possible Mean Time Between Failure (MTBF) for the switch.
* Designed for the future
Der Cisco Nexus 9500 Series Switches are designed for future expansion with the capability to support higher speed ports and more bandwidth.
* Power efficiency
Der Cisco Nexus 9500 Series Switches are the first switch chassis designed without a midplane. The line cards and fabric modules connect directly. This revolutionary design provides optimal front-to-back airflow and helps the switch operate with less power. Zusätzlich, all Cisco Nexus 9500 Series switch power supplies are rated at or higher than 80PLUS Platinum for AC inputs and equivalent efficiency for DC inputs.
The typical power consumption per 10-Gigabit Ethernet port is less than 3.5 Watt (W).
The typical power consumption per 40-and 100-Gigabit Ethernet port is less than 14W and 22W respectively.
Spezifikation
| N9K-C9516 Specification | |
|---|---|
| Chassis | ● Bis zu 16 Linienkarten ● Bis zu 10 Netzteile ● Bis zu 6 fabric modules of the same type ● Bis zu 2 Systemsteuerungen ● Bis zu 2 supervisors of the same type ● Bis zu 3 Lüftereinschübe |
| Number of line card slots | 16 |
| Körperlich (H x B x T) | 36.70 X 17.50 X 31.76 In. (93.41 X 44.50 X 80.67 cm) |
| Gewicht (Chassis) | 192 Pfund (87.3 kg) |
| Betriebstemperatur | 32 bis 104°F (0 bis 40°C) |
| Nicht betriebsbereit (Lagerung) Temperatur | -40 bis 158°F (-40 bis 70°C) |
| Rack-Einheiten | 21 |
| Mittlere Zeit zwischen Ausfällen (MTBF) Std | 680,000 |
| Feuchtigkeit | 5 Zu 95% (nicht kondensierend) |
| Höhe | 0 Zu 13,123 ft (0 bis 4000m) |
| Einhaltung gesetzlicher Vorschriften | Produkte müssen den CE-Kennzeichnungen gemäß den Richtlinien 2004/108/EG und 2006/95/EG entsprechen |
| Sicherheit | ● UL 60950-1 Zweite Ausgabe ● CAN/CSA-C22.2 Nr. 60950-1 Zweite Ausgabe ● IN 60950-1 Zweite Ausgabe ● IEC 60950-1 Zweite Ausgabe ● AS/NZS 60950-1 ● GB4943 |
| EMV: Emissionen | ● 47CFR Teil 15 (CFR 47) Klasse a ● AS/NZS CISPR22 Klasse A ● CISPR22 Klasse A ● EN55022 Klasse A ● ICES003 Klasse A ● VCCI-Klasse A ● EN61000-3-2 ● EN61000-3-3 ● KN22 Klasse A ● CNS13438 Klasse A |
| EMV: Immunität | ● EN55024 ● CISPR24 ● EN300386 ● KN 61000-4 Serie |
| RoHS | Das Produkt ist RoHS-6-konform, mit Ausnahmen für Bleikugel-Gitteranordnungen (BGA) Kugeln und Blei-Pressverbindungen. |
Verpackungsinformationen
Cisco Nexus 9500 Series switch N9K-C9516 is sealed in cisco original box. We will also pack N9K-C9516 with the second box before shipping.
Sendung
Unsere Produkte werden per FedEx versendet,DHL,TNT,UPS,EMS,und so weiter. aber der käufer ist verantwortlich für
Zollabfertigung und Zahlung des Tarifs, wenn das Produkt im Zielland ankommt.
Versandarten
2-4 Arbeitstage
2-4 Arbeitstage
2-4 Arbeitstage
5-7 Arbeitstage
Bezahlverfahren
T/T,Western Union, HSBC und Money Gram werden akzeptiert. Eine schnellere Zahlung hilft Ihnen, die Artikel früher zu erhalten.
Bewertungen
Es gibt noch keine Bewertungen.