The Cisco Firepower 2100 Series is a family of four threat-focused NGFW security platforms that deliver business resiliency through superior threat defense. It offers exceptional sustained performance when advanced threat functions are enabled. These platforms uniquely incorporate an innovative dual multicore CPU architecture that optimizes firewall, cryptographic, and threat inspection functions simultaneously. The series’ firewall throughput range addresses use cases from the Internet edge to the data center. Network Equipment Building Standards (NEBS)- compliance is supported by the Cisco Firepower 2100 Series platform. The FPR2130-ASA-K9 stands for Cisco Firepower 2130 ASA Appliance, 1RU, 1 x Network Module Bays.
shows the quick spec.
| Product Number | FPR2130-ASA-K9 |
| Product Description | Cisco Firepower 2130 ASA Appliance, 1RU,1 x Network Module Bays |
| ASA Performance and Capabilities on Firepower Appliances | |
| Stateful inspection firewall throughput | 10 Gbps |
| Stateful inspection firewall throughput (multiprotocol) | 5 Gbps |
| Concurrent firewall connections | 2 million |
| New connections per second | 40000 |
| Hardware Specifications | |
| Dimensions (H x W x D) | 1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
| Form factor (rack units) | 1RU |
| I/O module slots | 1 NM slot |
| Integrated I/O | 12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
| Network modules | (FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
| Maximum number of interfaces | Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
| Integrated network management ports | 1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) |
Specification
| FPR2130-ASA-K9 | ||
|---|---|---|
| Product Number | FPR2130-ASA-K9 | |
| Product Description | Cisco Firepower 2130 ASA Appliance, 1RU, 1 x Network Module Bays | |
| ASA Performance and Capabilities on Firepower Appliances | ||
| Stateful inspection firewall throughput | 10 Gbps | |
| Stateful inspection firewall throughput (multiprotocol) | 5 Gbps | |
| Concurrent firewall connections | 2 million | |
| New connections per second | 40000 | |
| IPsec VPN throughput (450B UDP L2L test) | 1 Gbps | |
| IPsec/Cisco AnyConnect/Apex site-to-site VPN peers | 7500 | |
| Maximum number of VLANs | 750 | |
| Security contexts (included; maximum) | 2; 30 | |
| High availability | Active/active and active/standby | |
| Scalability | VPN Load Balancing | |
| Centralized management | Centralized configuration, logging, monitoring, and reporting are performed by Cisco Security Manager or alternatively in the cloud with Cisco Defense Orchestrator | |
| Adaptive Security Device Manager | Web-based, local management for small-scale deployments | |
| Hardware Specifications | ||
| Dimensions (H x W x D) | 1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) | |
| Form factor (rack units) | 1RU | |
| I/O module slots | 1 NM slot | |
| Integrated I/O | 12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces | |
| Network modules | (FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module | |
| Maximum number of interfaces | Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) | |
| Integrated network management ports | 1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) | |
| Serial port | 1 x RJ-45 console | |
| USB | 1 x USB 2.0 Type-A (500mA) | |
| Storage | 1x 200 GB, 1x spare slot (for MSP) | |
| Power supplies | Configuration | Single integrated 250W AC power supply. |
| AC input voltage | 100 to 240V AC | |
| AC maximum input current | < 6A at 100V | |
| AC maximum output power | 400W | |
| AC frequency | 50 to 60 Hz | |
| AC efficiency | >89% at 50% load | |
| DC input voltage | -48V to -60VDC | |
| DC maximum input current | < 12.5A at -48V | |
| DC maximum output power | 350W | |
| DC efficiency | >88% at 50% load | |
| Redundancy | 1+1 AC or DC with dual supplies | |
| Fans | 1 hot-swappable fan module (with 4 fans) | |
| Noise | 56 dBA @ 25C 77 dBA at highest system performance. |
|
| Rack mountable | Yes. Mount rails included (4-post EIA-310-D rack) | |
| Weight | 19.4 lb (8.8 kg) 1 x power supplies, 1 x NM, 1 x fan module, 2x SSDs | |
| Temperature: operating | 32 to 104°F (0 to 40°C) or NEBS operation (see below) | |
| Temperature: nonoperating | -4 to 149°F (-20 to 65°C) | |
| Humidity: operating | 10 to 85% noncondensing | |
| Humidity: nonoperating | 5 to 95% noncondensing | |
| Altitude: operating | 10,000 ft (max) or NEBS operation (see below) | |
| Altitude: nonoperating | 40,000 ft (max) | |
| NEBS operation | Operating altitude: 0 to 13,000 ft (3962 m) Operating temperature: Long term: 0 to 45°C, up to 6,000 ft (1829 m) Long term: 0 to 35°C, 6,000 to 13,000 ft (1829 to 3964 m) Short term: -5 to 55°C, up to 6,000 ft (1829 m) |
|
Packing Information
Cisco Firepower 2100 Series Appliances FPR2130-ASA-K9 is sealed in cisco original box. We will also pack FFPR2130-ASA-K9 with the second box before shipping.
Shipment
Our products will be sent via FedEx,DHL,TNT,UPS,EMS,and so on.but the buyer is responsible for
customs clearance and pay tariff when the product arrived destination country.
Shipping Methods
2-4 business days
2-4 business days
2-4 business days
5-7 business days
Payment Method
T/T,Western Union, HSBC and Money Gram will be accepted.Faster payment will help you to get the items earlier.
Reviews
There are no reviews yet.