QSFP-100G-PSM4-S= Cisco 100 Gigabit Optical Modules

QSFP-100G-PSM4-S= Cisco 100 Gigabit Optical Modules 100GBASE PSM4 QSFP Transceiver, MPO, 500m over SMF

مواصفات المنتج:

مكان المنشأ : الولايات المتحدة الأمريكية

اسم العلامة التجارية : سيسكو

شهادة : لجنة الاتصالات الفدرالية

رقم الموديل :QSFP-100G-PSM4-S=

أقل كمية ممكن طلبها : 1/وحدة

موعد التسليم : 3 أيام

إرسال استفسار

وصف
المراجعات (0)

The Cisco® 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on a QSFP form factor.

The Cisco QSFP-100G-PSM4-S Module supports link lengths of up to 500 meters over SMF with MPO connectors. ال 100 Gigabit Ethernet signal is carried over 12-fiber parallel fiber terminated with MPO multifiber connectors.

QSFP-100G Optical modules provide these highlights:

•Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port

•Interoperable with other IEEE-compliant 100GBASE interfaces where applicable

•Certified and tested on Cisco QSFP-100G ports for superior performance, جودة, والموثوقية

•High-speed electrical interface compliant to IEEE 802.3bm

تخصيص

QSFP-100G-PSM4-S=
وصف	100GBASE PSM4 QSFP Transceiver, MPO, 500m over SMF
أبعاد	13.5 x 18.4 x 72.4 مم
QSFP Port cabling specifications
Nominal Wavelength (نانومتر)	1310
نوع الكابل	سمف
حجم اللب (Microns)	G.652
عرض النطاق الترددي مشروط (MHzkm)¹
مسافة الكابل	500م
استهلاك الطاقة (دبليو)	3.5
سحب لون علامة التبويب	Orange
*¹ Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm
Optical characteristics
*Transmit Power (ديسيبل) per lane^2**	الأعلى:+2.0 دقيقة:-9.4
*Receive Power (ديسيبل) per lane^23*	الأعلى:+2.0 دقيقة: -12.66
Receive Power (ديسيبل) per lane	1295 ل 1325
^2 Transmitter and receiver power is average optical power, unless specified ^3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation
Environmental Conditions and Power Requirements
Commercial temperature	0 إلى 70 درجة مئوية (32 إلى 158 درجة فهرنهايت)
درجة حرارة التخزين	-40 to 85°C (-40 to 185°F)
Regulatory and Standards compliance
Standards	•SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) – Rev 1.8 يمكن 10, 2013 •SFF-8636: Common Management Interface – DRAFT Rev 1.9 يمكن 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1شارع أغسطس 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6
أمان	•Cable jacket of QSFP copper modules is UL E116441 Compliant •QSFP copper cables are ELV compliant

جمع معلومات

سيسكو 100 Gigabit Optical Modules QSFP-100G-PSM4-S= is sealed in cisco original box. We will also pack QSFP-100G-PSM4-S= with the second box before shipping.