Brocade G620 Switch Review
The Brocade G620 6th-gen Fibre Channel switch focuses on application performance and scale-out network. It is a direct predecessor to the 6510 from several years ago, which we found to be a comprehensive enterprise SAN switch with a diverse range of connectivity options for Fibre Channel networks. The G620 integrates well into existing SAN fabrics and allows users to drive further with more performance and support next-gen storage trends such as NVMe-oF. It also features built-in instrumentation for some pretty extensive insight and control, which can potentially reduce cost for businesses, simplify management complexity and lower overall risk. With these tools, admins can also identify issues much more easily and fix anything the needs to be addressed. Like the G6510, this makes it an ideal choice for virtualized network environments that primarily use high-performance storage.
As far connectivity goes, Brocade’s G620 switch scales from 24 ل 48 SFP+ auto-sensing ports that support high-performance 32-Gbps SFP+ ports technology in a single domain. It features up to four 128-Gbps QSFP ports, which allows users to connect to the QSFP ports of another G620 or leverage them as additional device ports for up to 64 ports of connectivity. With Dynamic Ports on Demand, users can scale 24 ports to 64 ports via its 48 سفب + و 4 Q-Flex ports by increasing the license count on the switch. This gives users an easy consumption mode, growing the switch with their environment reducing initial costs.
تخصيص
| Enclosure | 1يو, port-side back-to-front exhaust airflow power from back. |
|---|---|
| Power inlet | C14 |
| مزودات الطاقة | Dual, hot-swappable, متكرر, AC input power supplies with integrated system cooling fans |
| المشجعين | Three fans integrated in each power supply and fan assembly |
| System architecture | Non Blocking shared memory switch |
| System processors | Freescale T1022 CPU |
| Port-to-port latency | Less than 900 nanoseconds (including FEC) with no contention (destination port is free) |
| Fibre Channel ports | 48 SFP+ ports that support any combination of Short Wavelength (SWL) and Long Wavelength (LWL) or Extended Long Wavelength (ELWL) optical media.
4 QSFP ports that support 32Gb/s QSFP transceivers. |
| ANSI Fibre Channel protocol | FC-PH (Fibre Channel Physical and Signaling Interface standard) |
| Modes of operation | Fibre Channel Class 2 and Class 3 |
| Fabric initialization | Complies with FC-SW-3 Rev. 6.6 |
| FCIP (Fibre Channel over IP) | Complies with FC-IP 2.3 of the FCA profile |
| حالة المنفذ | Bicolor LED (amber/green) |
| Weight and dimensions | ارتفاع: 1.73 in Width: 17.32 in Depth: 14.00 in Weight: 17 رطل (empty), 18.8رطل (محملة بالكامل) |
| قوة | |
| استهلاك الطاقة (typical configuration) | @100 VAC:
1.93أ |
| Minimum Number of Power Supplies | 1 (Input current is for 1 PSU. Watts and BTU/hr are with 2 وحدات دعم البرامج). |
| Data port specifications | |
| الموانئ 0 ل 47 | 10, 16, or 32Gb/s SFP+ optical ports |
| الموانئ 48 ل 63 | 4 x 16Gb/s (64جيجابايت/ثانية) أو 4 x 32Gb/s (128جيجابايت/ثانية) QSFP optical ports |
| Memory specifications | |
| Main memory | DDR3L SDRAM with 8-bit ECC, SORDIMM package, operating at 1200 طن متري / ثانية
2 غيغابايت, 64-bit |
| Boot flash | Parallel NOR flmh embedded memory
16 ميغابايت |
| eUSB module | 2 غيغابايت |
جمع معلومات
Brocade G620 – Switch is sealed in Brocade original box. We will also pack Brocade G620 – مع الصندوق الثاني قبل الشحن.
شحنة
سيتم إرسال منتجاتنا عبر FedEx,DHL,مادة تي إن تي,يو بي إس,EMS,وهلم جرا. ولكن المشتري هو المسؤول عن
التخليص الجمركي ودفع التعريفة الجمركية عند وصول المنتج إلى بلد المقصد.
طرق الشحن
2-4 أيام عمل
2-4 أيام عمل
2-4 أيام عمل
5-7 أيام عمل
طريقة الدفع او السداد
تي / ت,ويسترن يونيون, سيتم قبول HSBC و Money Gram. سيساعدك الدفع السريع في الحصول على العناصر في وقت مبكر.
المراجعات
لا توجد توصيات بعد.